Physical, chemical, and other data from bottle, XBT, and CTD casts from the SHOYO and other platforms from North Pacific Ocean and other locations. Data were collected by the Maritime Safety Agency; Hydrographic Division (MSA) and other institutions from 01 November 1983 to 31 December 1987. Data were processed by NODC to the NODC standard Station Data II Output Format (SD2) and the Universal Bathythermograph Output Format (UBT). The SD2 file format is used for physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5%), were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information, position, date and time are reported for each station. Each station contains the measurements taken at observed depth levels, but also includes data values interpolated to a set of standard depth levels. The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. The XBT data files contain temperature values at originators defined depths. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permit measurements to be obtained to 1830 m. The following was inserted prior to recent edit. Supporting data could not be located. Electrokinetograph (GEK) data collected by the Japanese Ocean Data Center. These data were collected in December 1987 by DNP cruises in the western Pacific. Documentation includes the record format. Data has been processed by NODC to the NODC standard Bathythermograph XBT Selected Depths (SBT) (C125) and Ocean Station (C100) formats. The Oceanographic Station Data (C100) format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters and temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels. The UBT (C125) format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. Depths are selected by the originator - usually at standard horizons or some fixed interval. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permitted measurements to be obtained to 1830 m.

Physical, chemical, and other data from CTD and XBT casts from the KOFU MARU and other platforms from the Philippine Sea and other locations. Data were collected by the Japanese Hydrographic Office and the Maritime Safety Agency; Hydrographic Division (MSA) from 24 November 1971 to 28 December 1989. Data were processed by NODC to the NODC standard Station Data II Output Format (SD2) and the Universal Bathythermograph Output Format (UBT). The SD2 file format is used for physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5%), were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information, position, date and time are reported for each station. Each station contains the measurements taken at observed depth levels, but also includes data values interpolated to a set of standard depth levels. The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. The XBT data files contain temperature values at originators defined depths. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permit measurements to be obtained to 1830 m. Data has been processed by NODC to the NODC standard Bathythermograph XBT Selected Depths (SBT) (C125) and Ocean Station (C100) formats. The Oceanographic Station Data (C100) format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters and temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels. The UBT (C125) format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. Depths are selected by the originator - usually at standard horizons or some fixed interval. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permitted measurements to be obtained to 1830 m.

Hydrophysical, hydrochemical, meteorological, and other data were collected using bottle and XBT casts in Pacific Ocean from January 1, 1994 to December 31, 1994. These data were submitted by Dr. Tadao Tatsuno of the Japanese Hydrographic Office.

Physical and other data were collected from CTD casts, current meters, and other instruments. Data were collected by the Japanese Hydrographic Office from 01 January 1990 to 31 December 1990. Formats for data are not available at this time.

Physical and other data were collected from CTD casts, current meters, and other instruments. Data were collected by the Japanese Hydrographic Office from 01 January 1989 to 31 December 1989. Formats for data are not available at this time.

Physical and chemical data were collected using current meter, CTD, and buoy casts in the TOGA area of the Pacific Ocean from NOAA Ship OCEANOGRAPHER and R/V XIANGYANGHONG #14 from 25 January 1987 to 24 October 1987. Data were collected and submitted by the Pacific Marine Environmental Laboratory (PMEL). Data has been processed by NODC to the NODC standard Bathythermograph (XBT) (C116) format. The C116/C118 format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data record was comprised of pairs of temperature-depth values. Unlike the MBT Data File, in which temperature values were recorded at uniform 5 m intervals, the XBT data files contained temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of either 450 or 760 m. With special instruments, measurements can be obtained to 1830 m. Prior to July 1994, XBT data were routinely processed to one of these standard types. XBT data are now processed and loaded directly in to the NODC Ocean Profile Data Base (OPDB). Historic data from these two data types were loaded into the OPDB.

Current components, physical, and other data from moored current meters and CTD casts from NOAA Ship DISCOVERER and other platforms from the NE Pacific (limit-180). Data were collected by Pacific Marine Environmental Laboratory (PMEL) as part of the VENTS program from 22 April 1994 to 20 August 1995. Data has been processed by NODC to the standard NODC F015-Current Meter Data (Components) and the F022-CTD High Resolutions formats. This F015 format is used for time series measurements of ocean currents. These data are obtained from current meter moorings and represent Eulerian method of current measurement, i.e., the meters are deployed at a fixed point and measure flow past a sensor. Position, bottom depth, sensor depth, and meter characteristics are reported for each station. The data record comprises values of east-west (u) and north-south (v) current vector components at specified date and time. Current direction is defined as the direction toward which the water is flowing with positive directions east and north and negative directions west and south. Data values may be subject to averaging or filtering and are typically reported at 10-15 minute time intervals. Water temperature, pressure, and conductivity or salinity may also be reported. A text record is available for optional comments. The F022 format contains high-resolution data collected using CTD (conductivity-temperature-depth) and STD (salinity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity, and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t), and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals. A text record is available for comments.

Current components, physical, and other data from moored current meters and CTD casts from NOAA Ship DISCOVERER and other platforms from the NE Pacific (limit-180). Data were collected by Pacific Marine Environmental Laboratory (PMEL) as part of the VENTS program from 18 August 1993 to 28 September 1994. Data has been processed by NODC to the standard NODC F015-Current Meter Data (Components) and the F022-CTD High Resolutions formats. Data in this accession do not conform completely to the F022-CTD format. This F015 format is used for time series measurements of ocean currents. These data are obtained from current meter moorings and represent Eulerian method of current measurement, i.e., the meters are deployed at a fixed point and measure flow past a sensor. Position, bottom depth, sensor depth, and meter characteristics are reported for each station. The data record comprises values of east-west (u) and north-south (v) current vector components at specified date and time. Current direction is defined as the direction toward which the water is flowing with positive directions east and north and negative directions west and south. Data values may be subject to averaging or filtering and are typically reported at 10-15 minute time intervals. Water temperature, pressure, and conductivity or salinity may also be reported. A text record is available for optional comments. The F022 format contains high-resolution data collected using CTD (conductivity-temperature-depth) and STD (salinity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity, and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t), and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals. A text record is available for comments.

CTD, XCTD, and XBT data were collected from the MIRAI from the North Pacific Ocean. Data were collected from 30 October 1998 to 01 February 1999. Data were submitted by Japan Agency for Marine-Earth Science and Technology (JAMSTEC). Parameters include temperature, conductivity, salinity, sigma-t, and dissolved oxygen.