데이터셋 상세
미국
Physical, chemical, and other data from bottle, XBT, and CTD casts from SHOYO and other platforms from North Pacific Ocean and other locations from 1983-11-01 to 1987-12-31 (NCEI Accession 8800147)
Physical, chemical, and other data from bottle, XBT, and CTD casts from the SHOYO and other platforms from North Pacific Ocean and other locations. Data were collected by the Maritime Safety Agency; Hydrographic Division (MSA) and other institutions from 01 November 1983 to 31 December 1987. Data were processed by NODC to the NODC standard Station Data II Output Format (SD2) and the Universal Bathythermograph Output Format (UBT). The SD2 file format is used for physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5%), were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information, position, date and time are reported for each station. Each station contains the measurements taken at observed depth levels, but also includes data values interpolated to a set of standard depth levels. The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. The XBT data files contain temperature values at originators defined depths. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permit measurements to be obtained to 1830 m. The following was inserted prior to recent edit. Supporting data could not be located. Electrokinetograph (GEK) data collected by the Japanese Ocean Data Center. These data were collected in December 1987 by DNP cruises in the western Pacific. Documentation includes the record format. Data has been processed by NODC to the NODC standard Bathythermograph XBT Selected Depths (SBT) (C125) and Ocean Station (C100) formats. The Oceanographic Station Data (C100) format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters and temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels. The UBT (C125) format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. Depths are selected by the originator - usually at standard horizons or some fixed interval. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permitted measurements to be obtained to 1830 m.
데이터 정보
연관 데이터
Physical and other data from CTD casts, XBT casts, current meters, and other instruments from the SHOYO and other platforms from the NE Pacific (limit-180) and other locations by the Japanese Hydrographic Office and the Maritime Safety Agency; Hydrographic Division from 1993-01-16 to 1995-12-01 (NCEI Accession 9600079)
공공데이터포털
Physical and other data from CTD casts, XBT casts, current meters, and other instruments from the SHOYO and other platforms from the NE Pacific (limit-180) and other locations from 16 January 1993 to 01 December 1995. Data were collected by the Japanese Hydrographic Office and the Maritime Safety Agency; Hydrographic Division (MSA). Additional funding for digitizing historic data were provided by the Global Ocean Data Archaeology and Rescue (GODAR) project.
Physical, chemical, and other data from CTD and XBT casts from the KOFU MARU and other platforms from the Philippine Sea and other locations from 1971-11-24 to 1989-12-28 (NCEI Accession 9100090)
공공데이터포털
Physical, chemical, and other data from CTD and XBT casts from the KOFU MARU and other platforms from the Philippine Sea and other locations. Data were collected by the Japanese Hydrographic Office and the Maritime Safety Agency; Hydrographic Division (MSA) from 24 November 1971 to 28 December 1989. Data were processed by NODC to the NODC standard Station Data II Output Format (SD2) and the Universal Bathythermograph Output Format (UBT). The SD2 file format is used for physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5%), were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information, position, date and time are reported for each station. Each station contains the measurements taken at observed depth levels, but also includes data values interpolated to a set of standard depth levels. The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. The XBT data files contain temperature values at originators defined depths. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permit measurements to be obtained to 1830 m. Data has been processed by NODC to the NODC standard Bathythermograph XBT Selected Depths (SBT) (C125) and Ocean Station (C100) formats. The Oceanographic Station Data (C100) format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters and temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels. The UBT (C125) format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. Depths are selected by the originator - usually at standard horizons or some fixed interval. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permitted measurements to be obtained to 1830 m.
Physical and other data from bottle and XBT casts from the AGS NO 2 and other platforms from the NW Pacific (limit-180) from 1967-01-07 to 1984-03-02 (NCEI Accession 8500196)
공공데이터포털
Physical and other data were collected from bottle and XBT casts from the AGS NO 2 and other platforms from the NW Pacific (limit-180). Data were collected by the Fisheries Agency of Japan (JFA) and other institutions from 07 January 1967 to 02 March 1984. Data were processed by NODC to the NODC standard Station Data II Output Format (SD2) and the Universal Bathythermograph Output Format (UBT). The SD2 file format is used for physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5%), were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information, position, date and time are reported for each station. Each station contains the measurements taken at observed depth levels, but also includes data values interpolated to a set of standard depth levels. The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. The XBT data files contain temperature values at originators defined depths. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permit measurements to be obtained to 1830 m. Data has been processed by NODC to the NODC standard Bathythermograph XBT Selected Depths (SBT) (C125) and Ocean Station (C100) formats. The Oceanographic Station Data (C100) format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters and temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels. The UBT (C125) format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. Depths are selected by the originator - usually at standard horizons or some fixed interval. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permitted measurements to be obtained to 1830 m.
Temperature, salinity, nutrients and other profile data from bottle, XBT, and CTD casts in the North Pacific Ocean, Sea of Japan, and other Sea areas by Japan Meteorological Agency (JMA) from 01 January 1965 to 31 December 2002 (NCEI Accession 0000972)
공공데이터포털
Nutrients and temperature profile data were collected using bottle, XBT, and CTD casts in the North Pacific Ocean, Sea of Japan, and other Sea areas from 01 January 1965 to 31 December 2002. Data were submitted by the Japan Meteorological Agency (JMA).
Physical, nutrients, and chemical data from bottle casts and other instruments in the North and South Pacific Ocean by the Naval Oceanographic Office from 1925-06-26 to 1996-04-28 (NCEI Accession 9600158)
공공데이터포털
Physical, nutrients, and chemical data were collected using bottle, CTD, XBT, XSV, AXBT, thermometer, and tide gauge casts from AIRCRAFT in the North and South Pacific Ocean. Data were collected and submitted by the Naval Oceanographic Office. Data were collected from 26 June 1925 to 28 April 1996.
Physical properties, hydrochemicals, depth, and other data using CTD casts from 1994-01-01 to 1994-12-31 (NCEI Accession 9600128)
공공데이터포털
Hydrophysical, hydrochemical, meteorological, and other data were collected using bottle and XBT casts in Pacific Ocean from January 1, 1994 to December 31, 1994. These data were submitted by Dr. Tadao Tatsuno of the Japanese Hydrographic Office.
Physical data from CTD, XCTD, and XBT casts from the MIRAI from the North Pacific Ocean from 30 October 1998 to 01 February 1999 (NCEI Accession 0000839)
공공데이터포털
CTD, XCTD, and XBT data were collected from the MIRAI from the North Pacific Ocean. Data were collected from 30 October 1998 to 01 February 1999. Data were submitted by Japan Agency for Marine-Earth Science and Technology (JAMSTEC). Parameters include temperature, conductivity, salinity, sigma-t, and dissolved oxygen.
Physical and chemical data from Secchi disk, bathythermograph (BT and XBT), plankton net, and CTD casts in the Pacific Ocean from 1950-01-01 to 1994-12-31 (NCEI Accession 9800187)
공공데이터포털
Physical and chemical data were collected using Secchi disk, bathythermograph (BT and XBT), plankton net, and CTD casts from the RYOFU MARU, KEIFU MARU, KOFU MARU, SHUMPU MARU, CHOFU MARU, and SEIFU MARU. Data were collected in the Pacific Ocean from January 1, 1950 to December 31, 1994. Data were collected and submitted by the Japan Meteorological Agency (JMA).
Physical and other data from bottle and XBT casts from the PUSAN-852 and other platforms from the Philippine Sea from 1978-01-17 to 1988-06-04 (NCEI Accession 8900142)
공공데이터포털
Physical and other data from bottle and XBT casts from the PUSAN-852 and other platforms from the Philippine Sea. Data were collected by the Maritime Safety Agency; Hydrographic Division (MSA) and other institutions from 17 January 1978 to 04 June 1988. Data were processed by NODC to the NODC standard Station Data II Output Format (SD2) and the Universal Bathythermograph Output Format (UBT). The SD2 file format is used for physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5%), were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information, position, date and time are reported for each station. Each station contains the measurements taken at observed depth levels, but also includes data values interpolated to a set of standard depth levels. The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. The XBT data files contain temperature values at originators defined depths. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permit measurements to be obtained to 1830 m. The following was present in Abstract before current edit but digital data could not be located. The data consists of Geomagnetic ElectroKinetograph current (GEK) measurements collected by various ships in the Pacific ocean. Data has been processed by NODC to the NODC standard Bathythermograph XBT Selected Depths (SBT) (C125) and Ocean Station (C100) formats. The Oceanographic Station Data (C100) format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters and temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels. The UBT (C125) format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. Depths are selected by the originator - usually at standard horizons or some fixed interval. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permitted measurements to be obtained to 1830 m.
목록