Physical and nutrients data were collected from bottle casts in the South Pacific Ocean and other locations. Data were collected from 03 December 1928 to 01 November 1978. Parameters include temperature and salinity. Parameters also include concentrations of phosphate, oxygen, silicate, and nitrate.

Physical, chemical, and other data from bottle, XBT, and CTD casts from the SHOYO and other platforms from North Pacific Ocean and other locations. Data were collected by the Maritime Safety Agency; Hydrographic Division (MSA) and other institutions from 01 November 1983 to 31 December 1987. Data were processed by NODC to the NODC standard Station Data II Output Format (SD2) and the Universal Bathythermograph Output Format (UBT). The SD2 file format is used for physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5%), were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information, position, date and time are reported for each station. Each station contains the measurements taken at observed depth levels, but also includes data values interpolated to a set of standard depth levels. The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. The XBT data files contain temperature values at originators defined depths. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permit measurements to be obtained to 1830 m. The following was inserted prior to recent edit. Supporting data could not be located. Electrokinetograph (GEK) data collected by the Japanese Ocean Data Center. These data were collected in December 1987 by DNP cruises in the western Pacific. Documentation includes the record format. Data has been processed by NODC to the NODC standard Bathythermograph XBT Selected Depths (SBT) (C125) and Ocean Station (C100) formats. The Oceanographic Station Data (C100) format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters and temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels. The UBT (C125) format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. Depths are selected by the originator - usually at standard horizons or some fixed interval. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permitted measurements to be obtained to 1830 m.

Physical, nutrients, and other data from were collected from bottle casts from the Equatorial Pacific. Data were collected by the Lamont-Doherty Earth Observatory of Columbia University from 07 February 1979 to 14 June 1980. Physical parameters include profiles of temperature, salinity, and sigma-t. Nutrient parameters include concentrations profiles of oxygen, phosphate, nitrate, nitrite, silicate, partial CO2, and total CO2. Other parameters include alkalinity, Delta C-14, Delta C-13, and concentration of tritium.

Physical, nutrients, and other data were collected from CTD and bottle casts from the North Pacific Ocean from 19 February 1991 to 31 December 2000. Parameters include water depth, temperature, and salinity. Parameters also include concentrations of chlorophyll, silicate, phosphate, nitrate, and nitrite. Minkley, B.G., and F.A. Whitney. 2001. Summary of Hydrographic/CTD Observations made along Line P and at Station P: 1991-1999. Canadian Data Report of Hydrography and Ocean Sciences No. 156: 40 p. A summary of 30 missions which sampled part or all of Line P between January 1991 and December 1999 is provided. Plots of mission tracks show the areas surveyed, participants are listed, and types of sampling, inventoried. A review of sampling equipment outlines the conversion from 1.7 litre Niskin bottles mounted on 5/32-inch wire hydro wire to CTD/Rosette cast sampling using 10 litre bottles. Missions which supported programs for World Ocean Circulation Experiment and Joint Global Ocean Flux Studies are listed. A previous report contained observations for the period January 1980 to December 1989 and is found in Canadian Data Report of Hydrography and Ocean Sciences No.136, by Tabata and Brown. Line P Program, Institute of Ocean Sciences, Fisheries and Oceans Canada.