Physical and other data were collected from bottle and XBT casts from the AGS NO 2 and other platforms from the NW Pacific (limit-180). Data were collected by the Fisheries Agency of Japan (JFA) and other institutions from 07 January 1967 to 02 March 1984. Data were processed by NODC to the NODC standard Station Data II Output Format (SD2) and the Universal Bathythermograph Output Format (UBT). The SD2 file format is used for physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5%), were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information, position, date and time are reported for each station. Each station contains the measurements taken at observed depth levels, but also includes data values interpolated to a set of standard depth levels. The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. The XBT data files contain temperature values at originators defined depths. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permit measurements to be obtained to 1830 m. Data has been processed by NODC to the NODC standard Bathythermograph XBT Selected Depths (SBT) (C125) and Ocean Station (C100) formats. The Oceanographic Station Data (C100) format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters and temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels. The UBT (C125) format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. Depths are selected by the originator - usually at standard horizons or some fixed interval. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permitted measurements to be obtained to 1830 m.

Physical, chemical, and other data from CTD and XBT casts from the KOFU MARU and other platforms from the Philippine Sea and other locations. Data were collected by the Japanese Hydrographic Office and the Maritime Safety Agency; Hydrographic Division (MSA) from 24 November 1971 to 28 December 1989. Data were processed by NODC to the NODC standard Station Data II Output Format (SD2) and the Universal Bathythermograph Output Format (UBT). The SD2 file format is used for physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5%), were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information, position, date and time are reported for each station. Each station contains the measurements taken at observed depth levels, but also includes data values interpolated to a set of standard depth levels. The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. The XBT data files contain temperature values at originators defined depths. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permit measurements to be obtained to 1830 m. Data has been processed by NODC to the NODC standard Bathythermograph XBT Selected Depths (SBT) (C125) and Ocean Station (C100) formats. The Oceanographic Station Data (C100) format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters and temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels. The UBT (C125) format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. Depths are selected by the originator - usually at standard horizons or some fixed interval. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permitted measurements to be obtained to 1830 m.

Physical, chemical, and other data from bottle, XBT, and CTD casts from the SHOYO and other platforms from North Pacific Ocean and other locations. Data were collected by the Maritime Safety Agency; Hydrographic Division (MSA) and other institutions from 01 November 1983 to 31 December 1987. Data were processed by NODC to the NODC standard Station Data II Output Format (SD2) and the Universal Bathythermograph Output Format (UBT). The SD2 file format is used for physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5%), were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information, position, date and time are reported for each station. Each station contains the measurements taken at observed depth levels, but also includes data values interpolated to a set of standard depth levels. The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. The XBT data files contain temperature values at originators defined depths. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permit measurements to be obtained to 1830 m. The following was inserted prior to recent edit. Supporting data could not be located. Electrokinetograph (GEK) data collected by the Japanese Ocean Data Center. These data were collected in December 1987 by DNP cruises in the western Pacific. Documentation includes the record format. Data has been processed by NODC to the NODC standard Bathythermograph XBT Selected Depths (SBT) (C125) and Ocean Station (C100) formats. The Oceanographic Station Data (C100) format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD (conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters and temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t) sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels. The UBT (C125) format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. Depths are selected by the originator - usually at standard horizons or some fixed interval. Standard XBTs can obtain profiles to depths of either 450 or 760 m. Special instruments permitted measurements to be obtained to 1830 m.

Physical, nutrients, and chemical data were collected using bottle, CTD, XBT, XSV, AXBT, thermometer, and tide gauge casts from AIRCRAFT in the North and South Pacific Ocean. Data were collected and submitted by the Naval Oceanographic Office. Data were collected from 26 June 1925 to 28 April 1996.

This dataset contains sixteen XBT datasets collected as part of Shipboard Environmental data Acquisition System (SEAS) III program. The cruises were conducted using many different ships. The bathythermograph (XBT) data was collected between August 30, 1990 and July 24, 1991. The data were sent from the cruise ships to the National Ocean Service, Rockville, MD via telecommunication. This data is currently available in the C116 file format of NODC.

Physical and other data from CTD casts, XBT casts, current meters, and other instruments from the SHOYO and other platforms from the NE Pacific (limit-180) and other locations from 16 January 1993 to 01 December 1995. Data were collected by the Japanese Hydrographic Office and the Maritime Safety Agency; Hydrographic Division (MSA). Additional funding for digitizing historic data were provided by the Global Ocean Data Archaeology and Rescue (GODAR) project.

Current components, physical, and other data were collected by moored current meters and CTD casts from NOAA Ship McARTHUR and other platforms. Data were collected by Pacific Marine Environmental Laboratory (PMEL) from 04 October 1983 to 01 February 1984. Data has been processed by NODC to the standard NODC F015-Current Meter Data (Components) and the F022-CTD High Resolutions formats. This F015 format is used for time series measurements of ocean currents. These data are obtained from current meter moorings and represent Eulerian method of current measurement, i.e., the meters are deployed at a fixed point and measure flow past a sensor. Position, bottom depth, sensor depth, and meter characteristics are reported for each station. The data record comprises values of east-west (u) and north-south (v) current vector components at specified date and time. Current direction is defined as the direction toward which the water is flowing with positive directions east and north and negative directions west and south. Data values may be subject to averaging or filtering and are typically reported at 10-15 minute time intervals. Water temperature, pressure, and conductivity or salinity may also be reported. A text record is available for optional comments. The F022 format contains high-resolution data collected using CTD (conductivity-temperature-depth) and STD (salinity-temperature-depth) instruments. As they are lowered and raised in the oceans, these electronic devices provide nearly continuous profiles of temperature, salinity, and other parameters. Data values may be subject to averaging or filtering or obtained by interpolation and may be reported at depth intervals as fine as 1m. Cruise and instrument information, position, date, time and sampling interval are reported for each station. Environmental data at the time of the cast (meteorological and sea surface conditions) may also be reported. The data record comprises values of temperature, salinity or conductivity, density (computed sigma-t), and possibly dissolved oxygen or transmissivity at specified depth or pressure levels. Data may be reported at either equally or unequally spaced depth or pressure intervals. A text record is available for comments.

Current meter components and other data were collected from XCP casts from VARIOUS SMALL VESSELS and other platforms in the North Atlantic Ocean. Data were collected by the Battelle Marine Research Laboratory - New England as part of the OCEAN DUMPING and other projects from 01 December 1990 to 01 June 1991. Parameters include water depth (meters), temperature (degrees Celsius), East-West velocity component (U), North South velocity component(V), and velocity error. Data are in a semi-colon separated value format.

This dataset includes XBT data collected from torpedoes in the AUTEC Range in the Tongue of the Ocean, Bahama Islands, as part of the AUTEC tests 113/141 by the Naval Underwater Systems Center from March 7, 1969, to April 18, 1972.

Oceanographic Station Data and temperature profiles were collected from bottle and XBT casts from the COCHRANE and other platforms from 28 October 1973 to 29 January 1975. Data were collected by the US Navy and other institutions as part of the International Decade of Ocean Exploration / Controlled Ecosystem Pollution Experiment (IDOE/CEPEX). Data were processed by NODC to the NODC standard Oceanographic Station Data (SD2) and Universal bathythermograph Output (UBT) formats. The Oceanographic Station Data format contains physical-chemical oceanographic data recorded at discrete depth levels. Most of the observations were made using multi-bottle Nansen casts or other types of water samplers. A small amount (about 5 percent) were obtained using electronic CTD conductivity-temperature-depth) or STD (salinity-temperature-depth) recorders. The CTD/STD data were reported to NODC at depth levels equivalent to Nansen cast data, however, and have been processed and stored the same as the Nansen data. Cruise information (e.g., ship, country, institution), position, date, and time, and reported for each station. The principal measured parameters are temperature and salinity, but dissolved oxygen, phosphate, total phosphorus, silicate, nitrate, nitrite, and pH may be reported. Meteorological conditions at the time of the cast (e.g., air temperature and pressure, wind, waves) may also be reported, as well as auxiliary data such as water color (Forel-Ule scale), water transparency (Secchi disk depth), and depth to bottom. Values of density (sigma-t), sound velocity, and dynamic depth anomaly are computed from measured parameters. Each station contains the measurements taken at the observed depth levels, but also includes data values interpolated to a set of standard depth levels. The UBT format contains temperature-depth profile data obtained using expendable bathythermograph (XBT) instruments. Cruise information, position, date and time were reported for each observation. The data records are comprised of pairs of temperature-depth values. The XBT data files contain temperature values at non-uniform depths. These depths were recorded at the minimum number of points ("inflection points") required to accurately define the temperature curve. Standard XBTs can obtain profiles to depths of 450 m or 760 m. Special instruments permitted measurements to 1830 m.