Digital Elevation Model (DEM) derived from lidar data. LiDAR data collection was performed utilizing a Leica ALS-50 sensor, collecting multiple return x, y, and z data as well as intensity data. LiDAR data was processed to achieve a bare ground surface, and was delivered in LAS format. Classified LAS data was also used as a base for collection of hydro features, delivered in MicroStation v8 format. The dates of collection are: 1. JASPER COUNTY (full county): 20061227 to 20070216 2. COLLETON COUNTY (full county: 20070216 to 20070323 3. CHARLESTON COUNTY (Partial County): 20070222 to 20070223

This data set is comprised of lidar point cloud data. This project required lidar data to be acquired over Horry County, South Carolina. The total area of the Horry County Elevation Data and Imagery AOI is approximately 1092 square miles. Lidar data was collected and processed to meet the requirements of the project task order. The lidar collection was a collaborative effort between two data acquisition firms. While Woolpert was responsible for collection of the majority of the county, the coastal portion of the data was collected by Quantum Geospatial and is detailed in the processing steps of the metadata. Lidar data is a remotely sensed high resolution elevation data collected by an airborne platform. The lidar sensor uses a combination of laser range finding, GPS positioning, and inertial measurement technologies. The lidar systems collect data point clouds that are used to produce highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures, and vegetation. The task required the LiDAR data to be collected at a nominal pulse spacing (NPS) of 0.7 meters. The final products include classified LAS, four (4) foot pixel raster DEMs of the bare-earth surface in ERDAS IMG Format. Each LAS file contains lidar point information, which has been calibrated, controlled, and classified. Ground conditions: Water at normal levels; no unusual inundation; no snow. The bare earth DEMs along the coast may have a variance in the water heights due to temporal differences during the lidar data acquisition and will be represented in DEM as a seam-like anomaly. One coastal elevation was applied to entire project area. Due to differing acquisition dates and thus differing tide levels there will be areas in the DEM exhibiting what appears to be "digging" water features. Sometimes as much as approximately 2.5 feet. This was done to ensure that no coastal hydro feature was "floating" above ground surface. This coastal elevation will also affect connected river features wherein a sudden increase in flow will be observed in the DEM to accommodate the coastal elevation value. During Hydrologic breakline collection, Woolpert excluded obvious above-water piers or pier-like structures from the breakline placement. Some features extend beyond the apparent coastline and are constructed in a manner that can be considered an extension of the ground. These features were treated as ground during classification and subsequent hydrologic delineation. In all cases, professional practice was applied to delineate what appeared to be the coast based on data from multiple sources; Due to the many substructures and the complexity of the urban environment, interpolation and apparent "divots" (caused by tinning) may be evident in the surface of the bare earth DEM. In all cases, professional practice was applied to best represent the topography. The data received by the NOAA OCM are topographic data in LAS 1.2 format, classified as unclassified (1), ground (2), all noise (7), water (9), ignored ground (10), overlap unclassified (17), and overlap ground (18). Digital Elevation Models (DEMs) and breakline data are also available. The DEM data are available at: ftp://coast.noaa.gov/pub/DigitalCoast/lidar1_z/geoid18/data/4814/DEMs/ The breakline data are available at: ftp://coast.noaa.gov/pub/DigitalCoast/lidar1_z/geoid18/data/4814/breaklines Any conclusions drawn from the analysis of this information are not the responsibility of NOAA, the Office of Coastal Management (OCM)or its partners. Original contact information: Contact Org: Woolpert Phone: (937) 461-5660

ESCAMBIA: The Light Detection and Ranging (LiDAR) LAS dataset is a survey of select areas within Escambia County, Florida. These data were produced for Dewberry and Davis LLC. The Escambia County LiDAR Survey project area consists of approximately 803 square miles. The LiDAR point cloud was flown at a density sufficient to support a maximum final post spacing of 6 feet for unobscured areas. Land Air mapping acquired 110 flightlines between June 21, 2006 and July 18, 2006. The data was divided into 5000' by 5000' foot cells that serve as the tiling scheme. The Escambia County LiDAR Survey was collected under the guidance of a Professional Mapper/Surveyor. Dates of Collection: 20060621-20060718 Contractor: Dewberry and Davis, LLC SANTA ROSA: LiDAR data collection was performed utilizing a Leica ALS-50 sensor, collecting multiple return x, y, and z data as well as intensity data. LiDAR data was processed to achieve a bare ground surface. LiDAR data was delivered in LAS format. Dates of Collection: 20060112-20060228 Contractor: Photo Science, Inc. WALTON: LIDAR data is remotely sensed high-resolution elevation data collected by an airborne collection platform. Using a combination of laser range finding, GPS positioning and inertial measurement technologies; LIDAR instruments are able to make highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures and vegetation. This data of Walton County, Florida, was collected at sub-meter resolution to provide average point spacing of 0.7m for collected points. Up to 5 returns were recorded for each pulse in addition to an intensity value. No data for Eglin AFB, permission to fly over was ever granted. Dates of Collection: 20060710-11, 19-20, 22-23, 26-29, 20060801, 03, 06-07, 13, 15, 17 Contractor: Sanborn Original contact information: Contact Org: NOAA Office for Coastal Management Phone: 843-740-1202 Email: coastal.info@noaa.gov

TASK NAME: NOAA OCM Lidar for Lowndes County, GA with the option to Collect Lidar in Cook and Tift Counties, GA Lidar Data Acquisition and Processing Production Task NOAA Contract No. EA133C11CQ0010 Woolpert Order No. 05271 CONTRACTOR: Woolpert, Inc. This data set is comprised of lidar point cloud data, raster DEM, hydrologic 3-d breaklines, flightline vectors, survey control, project tile index, and project data extent. This task order requires lidar data to be acquired over the Lowndes County, GA area of interest (AOI), and will be acquired as part of this task order. The total area of the Lowndes County, GA AOI is approximately 500 square miles. The lidar data acquisition parameters for this mission are detailed in the lidar processing report for this task order. The lidar data will be acquired and processed under the requirements identified in this task order. Lidar data is a remotely sensed high resolution elevation data collected by an airborne platform. The lidar sensor uses a combination of laser range finding, GPS positioning, and inertial measurement technologies. The lidar systems collect data point clouds that are used to produce highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures, and vegetation. The task required the LiDAR data to be collected at a nominal pulse spacing (NPS) of 0.7 meters. The final products include classified LAS, four (4) foot pixel raster DEMs of the bare-earth surface ESRI Grid Format. Each LAS file contains lidar point information, which has been calibrated, controlled, and classified. Additional deliverables include hydrologic breakline data, flightline vectors, control data, tile index, lidar processing and survey reports in PDF format, FGDC metadata files for each data deliverable in .xml format. Ground conditions: Water at normal levels; no unusual inundation; no snow. Original contact information: Contact Org: Woolpert Phone: (937) 461-5660

TASK NAME: NOAA OCM Tift and Cook Counties GA Lidar Data Acquisition and Processing Production Task NOAA Contract No. EA133C-11-CQ-0010 Woolpert Order No. 75271 CONTRACTOR: Woolpert, Inc. This data set is comprised of lidar point cloud data, raster DEM, hydrologic 3-d breaklines, flightline vectors, survey control, project tile index, and project data extent. This task order requires lidar data to be acquired over the Tift and Cook Counties, GA area of interest (AOI), and will be acquired as part of this task order. The total area of the Tift and Cook Counties, GA AOI is approximately 515 square miles. The lidar data acquisition parameters for this mission are detailed in the lidar processing report for this task order. The lidar data will be acquired and processed under the requirements identified in this task order. Lidar data is a remotely sensed high resolution elevation data collected by an airborne platform. The lidar sensor uses a combination of laser range finding, GPS positioning, and inertial measurement technologies. The lidar systems collect data point clouds that are used to produce highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures, and vegetation. The task required the LiDAR data to be collected at a nominal pulse spacing (NPS) of 0.7 meters. The final products include classified LAS, four (4) foot pixel raster DEMs of the bare-earth surface ESRI Grid Format. Each LAS file contains lidar point information, which has been calibrated, controlled, and classified. Additional deliverables include hydrologic breakline data, flightline vectors, control data, tile index, lidar processing and survey reports in PDF format, FGDC metadata files for each data deliverable in .xml format. Ground conditions: Water at normal levels; no unusual inundation; no snow. Original contact information: Contact Org: Woolpert Phone: (937) 461-5660

These data were collected by Quantum Spatial, Inc. (QSI) for the National Oceanic and Atmospheric Administration (NOAA), National Geodetic Survey (NGS), Remote Sensing Devision (RSD), Coastal Mapping Program (CMP) using a Riegl VQ880G system. The Delivery 1 and Delivery 2 (D1/D2) data were acquired from 20161203 - 20170301 in nine missions. The missions were flown on 20161203, 20161209, 20161210, 20161228, 20161229, 20161230, 20170105, 20170228, and 20170301. The Delivery 3 (D3) data were acquired from 20161002 - 20170219 in fifteen missions. Data acquired on 10/02, pre-Hurricane Matthew, was only used to fill a small gap in data entirely over water where no bathymetric coverage was achieved. The Delivery 4 (D4) data were acquired from 20161211 - 20170204 in thirteen missions. The Delivery 5 (D5) data were acquired from 20170112 - 20170204 in eleven missions. The Delivery 6 (D6) data were acquired from 20161203 - 20170301 in eleven missions. The Delivery 7 (D7) data were acquired from 20170212 - 20170221 in eight missions. The Delivery 8 (D8) data were acquired from 20170218 - 20170227 in six missions.

This metadata record describes the topographic mapping of Hancock and Jackson Counties, Mississippi during 2005. Using a combination of laser rangefinding, GPS positioning and inertial measurement technologies; LIDAR instruments are able to make highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures and vegetation. This data was collected at submeter resolution to provide nominal 5m spacing of collected points. Multiple returns were recorded for each pulse in addition to an intensity value using a Leica ALS-50 Aerial Lidar Sensor. Original contact information: Contact Org: NOAA Office for Coastal Management Phone: 843-740-1202 Email: coastal.info@noaa.gov

Between January and March 2010, lidar data was collected in southeast/coastal Georgia under a multi-agency partnership between the Coastal Georgia Regional Development Center, USGS, FEMA, NOAA and local county governments. Data acquisition is for the full extent of coastal Georgia, approximately 50 miles inland, excluding counties with existing high-resolution lidar derived elevation data. The data capture area consists of an area of approximately 5703 square miles. This project is within the Atlantic Coastal Priority Area as defined by the National Geospatial Program (NGP) and supports homeland security requirements of the National Geospatial-Intelligence Agency (NGA). This project also supports the National Spatial Data Infrastructure (NSDI) and will advance USGS efforts related to The National Map and the National Elevation Dataset. The data were delivered in LAS format version 1.2 in 5000 x 5000 foot tiles. The data are classified according to ASPRS LAS 1.2 classification scheme: Class 1 - Unclassified Class 2 - Bare Earth Class 7 - Low Point (Noise) Class 9 - Water Class 10 - Land below sea level Class 12 - Overlap

This metadata document describes the collection and processing of Light Detection and Ranging (LIDAR) data over an area along the coast of Maine. Data was collected at a nominal two (2) meter post spacing between points. Two elevation data sets were compiled in this project, first surface returns, in which features that are above the ground, such as buildings, bridges, tree tops, etc. have not been eliminated and a Bare Earth Data set. Original contact information: Contact Org: NOAA Office for Coastal Management Phone: 843-740-1202 Email: coastal.info@noaa.gov

LIDAR data is remotely sensed high-resolution elevation data collected by an airborne collection platform. Using a combination of laser rangefinding, GPS positioning and inertial measurement technologies; LIDAR instruments are able to make highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures and vegetation. This data was collected at submeter resolution to provide nominal 1m spacing of collected points. Two returns were recorded for each pulse in addition to an intensity value. Original contact information: Contact Org: NOAA Office for Coastal Management Phone: 843-740-1202 Email: coastal.info@noaa.gov