TASK NAME: NOAA OCM Tift and Cook Counties GA Lidar Data Acquisition and Processing Production Task NOAA Contract No. EA133C-11-CQ-0010 Woolpert Order No. 75271 CONTRACTOR: Woolpert, Inc. This data set is comprised of lidar point cloud data, raster DEM, hydrologic 3-d breaklines, flightline vectors, survey control, project tile index, and project data extent. This task order requires lidar data to be acquired over the Tift and Cook Counties, GA area of interest (AOI), and will be acquired as part of this task order. The total area of the Tift and Cook Counties, GA AOI is approximately 515 square miles. The lidar data acquisition parameters for this mission are detailed in the lidar processing report for this task order. The lidar data will be acquired and processed under the requirements identified in this task order. Lidar data is a remotely sensed high resolution elevation data collected by an airborne platform. The lidar sensor uses a combination of laser range finding, GPS positioning, and inertial measurement technologies. The lidar systems collect data point clouds that are used to produce highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures, and vegetation. The task required the LiDAR data to be collected at a nominal pulse spacing (NPS) of 0.7 meters. The final products include classified LAS, four (4) foot pixel raster DEMs of the bare-earth surface ESRI Grid Format. Each LAS file contains lidar point information, which has been calibrated, controlled, and classified. Additional deliverables include hydrologic breakline data, flightline vectors, control data, tile index, lidar processing and survey reports in PDF format, FGDC metadata files for each data deliverable in .xml format. Ground conditions: Water at normal levels; no unusual inundation; no snow. Original contact information: Contact Org: Woolpert Phone: (937) 461-5660

Between January and March 2010, lidar data was collected in southeast/coastal Georgia under a multi-agency partnership between the Coastal Georgia Regional Development Center, USGS, FEMA, NOAA and local county governments. Data acquisition is for the full extent of coastal Georgia, approximately 50 miles inland, excluding counties with existing high-resolution lidar derived elevation data. The data capture area consists of an area of approximately 5703 square miles. This project is within the Atlantic Coastal Priority Area as defined by the National Geospatial Program (NGP) and supports homeland security requirements of the National Geospatial-Intelligence Agency (NGA). This project also supports the National Spatial Data Infrastructure (NSDI) and will advance USGS efforts related to The National Map and the National Elevation Dataset. The data were delivered in LAS format version 1.2 in 5000 x 5000 foot tiles. The data are classified according to ASPRS LAS 1.2 classification scheme: Class 1 - Unclassified Class 2 - Bare Earth Class 7 - Low Point (Noise) Class 9 - Water Class 10 - Land below sea level Class 12 - Overlap

TASK NAME:4 GA Counties of Elevation Data NOAA Contract No. EA133C11CQ0010 Requisition No. NCNP0000-11-02615 Woolpert Order No. 71511 CONTRACTOR: Woolpert, Inc. LiDAR data is a remotely sensed high resolution elevation data collected by an airborne platform. The LiDAR sensor uses a combination of laser range finding, GPS positioning, and inertial measurement technologies. The LiDAR systems collect data point clouds that are used to produce highly detailed Digital Elevation Models (DEMs) of the earth's terrain, man-made structures, and vegetation. The task required the LiDAR data to be collected at a nominal pulse spacing (NPS) of 1.0 meter. The final products include full classified LAS, hydrologically flattened four (4) foot pixel raster DEM's of the bare earth surface in ESRI Floating Point Grid Format (ArcGRID DEMs), and hydrologically flattened breaklines. Rasters were later convert to GeoTIFF format with vertical units of feet. Original contact information: Contact Org: National Oceanic and Atmospheric Administration (NOAA) Title: Coastal Services Center Phone: (843) 740-1200

Digital Elevation Model (DEM) derived from lidar data. LiDAR data collection was performed utilizing a Leica ALS-50 sensor, collecting multiple return x, y, and z data as well as intensity data. LiDAR data was processed to achieve a bare ground surface, and was delivered in LAS format. Classified LAS data was also used as a base for collection of hydro features, delivered in MicroStation v8 format. The dates of collection are: 1. JASPER COUNTY (full county): 20061227 to 20070216 2. COLLETON COUNTY (full county: 20070216 to 20070323 3. CHARLESTON COUNTY (Partial County): 20070222 to 20070223

These data were collected by Dewberry using a CZMIL Nova system. The data were acquired from 20210126 - 20210227. The data include topobathy data in LAS 1.4 format classified as unclassified (1); ground (2); low noise (7); high noise (18); bathymetric bottom (40); water surface (41); derived water surface (42); submerged object, not otherwise specified (e.g., wreck, rock, submerged piling) (43); and no bottom found (bathymetric lidar point for which no detectable bottom return was received) (45) in accordance with project specifications; temporal surface not used in bathymetric classification (65). This dataset consists of approximately 225 square miles of data along the shores of Tampa Bay and contains 3,180 500 m x 500 m lidar tiles.

The data were acquired in March 2005 using the NASA Experimental Advanced Airborne Research Lidar (EAARL) platform in Sussex County, Delaware. Once acquired, the data were processed by USGS personnel into both 2-foot contours and digital elevation models. Multiple returns were recorded for each laser pulse. This is a bare earth data set. The points have approximately a 3 m ground spacing. Water points remain in the bare earth data set, they have not been classified as water. Original contact information: Contact Org: Delaware Geological Survey Phone: 302-831-2833 Email: delgeosurvey@udel.edu

Atlantic was contracted to acquire high resolution topographic LiDAR (Light Detection and Ranging) data located in Mobile County, Alabama. The intent was to collect one (1) Area of Interest (AOI) that encompasses Mobile County. The total client defined AOI was 1,402 square miles or 3,361 square kilometers. The data were collected from January 12 - 22, 2014. Classifications of data available from NOAA OCM are: 1 (Unclassified, 2 (Ground), 3 (Low Vegetation), 7 (Low Noise), 8 (Model Key Points), 9 (Water), 10 (Ignored Ground, Breakline Proximity). Low vegetation points were removed as they were incorrect and not required for delivery. Digital Elevation Models (DEMs) created from this lidar data are available for download. They are available at: https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=5169 . Breaklines are available at: https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/4966/supplemental/breaklines Original contact information: Contact Name: Scott Kearney Contact Org: City of Mobile Phone: (251) 208-7942 Email: kearney@cityofmobile.org

This data was collected by NOAA using a Riegl VQ880G sensor. The data was acquired August 5, 2017. The data includes topobathy data in LAS 1.2 format classified as created,unclassified (1); ground (2); topographic noise (7); bathymetric noise (22); water column (25); bathymetric bottom (26); water surface (27); International Hydrographic Organization S-57 object; not otherwise specified (30), in accordance with project specifications. The project consists of approximately 34 square miles of data along the shores of St. Jeromes Creek. This dataset contains 342 500 m x 500 m lidar tiles.

Light Detection and Ranging (LiDAR) data is remotely sensed high-resolution elevation data collected by an airborne collection platform. This LiDAR dataset is a survey of Coastal California. The project area consists of approximately 2616 square miles. The project design of the LiDAR data acquisition was developed to support a nominal post spacing of 1 meter. Fugro EarthData, Inc. acquired 1546 flight lines in 108 lifts between October 2009 and August 2011. This collection was a joint effort by the NOAA Office for Coastal Management (OCM); the California State Coastal Conservancy (SCC) Ocean Protection Council (OPC); Scripps Institution of Oceanography; and the Joint Airborne Lidar Bathymetry Technical Center of Expertise (JALBTCX). The data coverage extends landward 500 m from the shoreline, along the entire California coastline. The data collection was performed with two Piper Navajo twin engine aircrafts, utilizing a Leica ALS60 MPiA sensor; collecting multiple return x, y, and z as well as intensity data. The data were classified as Unclassified (1), Ground (2), Low Point (Noise) (7), Water (9), Mudflats (10), and 12 (Overlap). Only the Unclassified (1), Ground (2), Water (9), and Overlap (12) points are available for download from the NOAA OCM Digital Coast. Original contact information: Contact Org: NOAA Office for Coastal Management Phone: 843-740-1202 Email: coastal.info@noaa.gov

These data were collected by Leading Edge Geomatics using a Leica Chiroptera II Bathymetric & Topographic Sensor. The data were acquired from October 4, 2016 through November 1, 2016. The data includes topobathy data in LAS 1.2 format classified as created, never classified (0); Unclassified (1); Ground (2); Topo Noise (7); Water (9); Refracted Bathymetric Noise (22); Water Column (25); Bathymetric Bottom or Submerged Topography (26); Water Surface (27); Derived Water Surface (28); Submerged Object (29); Submerged Object International Hydrographic Organization S-57 object, not otherwise specified (30) in accordance with project specifications. The project area covers Marthas Vineyard and Nantucket Islands along with some shoal areas surrounding the islands. The project covers a total of 234 square miles within the AOI. This dataset contains 7030 - 500 m x 500 m lidar tiles. Original contact information: Contact Org: National Oceanic and Atmospheric Administration (NOAA), National Ocean Service (NOS), National Geodetic Survey (NGS), Remote Sensing Division Title: Chief, Remote Sensing Division Phone: 240-533-9576