ACTIVATE_Aerosol_AircraftInSitu_Falcon_Data is the aerosol data collected onboard the HU-25 Falcon aircraft via in-situ instrumentation during the ACTIVATE project. ACTIVATE was a 5-year NASA Earth-Venture Sub-Orbital (EVS-3) field campaign. Marine boundary layer clouds play a critical role in Earth’s energy balance and water cycle. These clouds cover more than 45% of the ocean surface and exert a net cooling effect. The Aerosol Cloud meTeorology Interactions oVer the western Atlantic Experiment (ACTIVATE) project was a five-year project that provides important globally-relevant data about changes in marine boundary layer cloud systems, atmospheric aerosols and multiple feedbacks that warm or cool the climate. ACTIVATE studied the atmosphere over the western North Atlantic and sampled its broad range of aerosol, cloud and meteorological conditions using two aircraft, the UC-12 King Air and HU-25 Falcon. The UC-12 King Air was primarily used for remote sensing measurements while the HU-25 Falcon will contain a comprehensive instrument payload for detailed in-situ measurements of aerosol, cloud properties, and atmospheric state. A few trace gas measurements were also onboard the HU-25 Falcon for the measurements of pollution traces, which will contribute to airmass classification analysis. A total of 150 coordinated flights over the western North Atlantic occurred through 6 deployments from 2020-2022. The ACTIVATE science observing strategy intensively targets the shallow cumulus cloud regime and aims to collect sufficient statistics over a broad range of aerosol and weather conditions which enables robust characterization of aerosol-cloud-meteorology interactions. This strategy was implemented by two nominal flight patterns: Statistical Survey and Process Study. The statistical survey pattern involves close coordination between the remote sensing and in-situ aircraft to conduct near coincident sampling at and below cloud base as well as above and within cloud top. The process study pattern involves extensive vertical profiling to characterize the target cloud and surrounding aerosol and meteorological conditions.

ACTIVATE_MetNav_AircraftInSitu_Falcon_Data is the meteorological and navigational data collected onboard the HU-25 Falcon aircraft via in-situ instrumentation during the ACTIVATE project. ACTIVATE was a 5-year NASA Earth-Venture Sub-Orbital (EVS-3) field campaign. Marine boundary layer clouds play a critical role in Earth’s energy balance and water cycle. These clouds cover more than 45% of the ocean surface and exert a net cooling effect. The Aerosol Cloud meTeorology Interactions oVer the western Atlantic Experiment (ACTIVATE) project was a five-year project that provides important globally-relevant data about changes in marine boundary layer cloud systems, atmospheric aerosols and multiple feedbacks that warm or cool the climate. ACTIVATE studied the atmosphere over the western North Atlantic and sampled its broad range of aerosol, cloud and meteorological conditions using two aircraft, the UC-12 King Air and HU-25 Falcon. The UC-12 King Air was primarily used for remote sensing measurements while the HU-25 Falcon will contain a comprehensive instrument payload for detailed in-situ measurements of aerosol, cloud properties, and atmospheric state. A few trace gas measurements were also onboard the HU-25 Falcon for the measurements of pollution traces, which will contribute to airmass classification analysis. A total of 150 coordinated flights over the western North Atlantic occurred through 6 deployments from 2020-2022. The ACTIVATE science observing strategy intensively targets the shallow cumulus cloud regime and aims to collect sufficient statistics over a broad range of aerosol and weather conditions which enables robust characterization of aerosol-cloud-meteorology interactions. This strategy was implemented by two nominal flight patterns: Statistical Survey and Process Study. The statistical survey pattern involves close coordination between the remote sensing and in-situ aircraft to conduct near coincident sampling at and below cloud base as well as above and within cloud top. The process study pattern involves extensive vertical profiling to characterize the target cloud and surrounding aerosol and meteorological conditions.

ACTIVATE_AerosolCloud_AircraftRemoteSensing_KingAir_Data is the aerosol and cloud data collected onboard the B-200 King Air aircraft via remote sensing instrumentation during the ACTIVATE project. ACTIVATE was a 5-year NASA Earth-Venture Sub-Orbital (EVS-3) field campaign. Marine boundary layer clouds play a critical role in Earth’s energy balance and water cycle. These clouds cover more than 45% of the ocean surface and exert a net cooling effect. The Aerosol Cloud meTeorology Interactions oVer the western Atlantic Experiment (ACTIVATE) project was a five-year project that provides important globally-relevant data about changes in marine boundary layer cloud systems, atmospheric aerosols and multiple feedbacks that warm or cool the climate. ACTIVATE studied the atmosphere over the western North Atlantic and sampled its broad range of aerosol, cloud and meteorological conditions using two aircraft, the UC-12 King Air and HU-25 Falcon. The UC-12 King Air was primarily used for remote sensing measurements while the HU-25 Falcon will contain a comprehensive instrument payload for detailed in-situ measurements of aerosol, cloud properties, and atmospheric state. A few trace gas measurements were also onboard the HU-25 Falcon for the measurements of pollution traces, which will contribute to airmass classification analysis. A total of 150 coordinated flights over the western North Atlantic occurred through 6 deployments from 2020-2022. The ACTIVATE science observing strategy intensively targets the shallow cumulus cloud regime and aims to collect sufficient statistics over a broad range of aerosol and weather conditions which enables robust characterization of aerosol-cloud-meteorology interactions. This strategy was implemented by two nominal flight patterns: Statistical Survey and Process Study. The statistical survey pattern involves close coordination between the remote sensing and in-situ aircraft to conduct near coincident sampling at and below cloud base as well as above and within cloud top. The process study pattern involves extensive vertical profiling to characterize the target cloud and surrounding aerosol and meteorological conditions.Marine boundary layer clouds play a critical role in Earth’s energy balance and water cycle. These clouds cover more than 45% of the ocean surface and exert a net cooling effect. The Aerosol Cloud meTeorology Interactions oVer the western Atlantic Experiment (ACTIVATE) project is a five-year project (January 2019-December 2023) that will provide important globally-relevant data about changes in marine boundary layer cloud systems, atmospheric aerosols and multiple feedbacks that warm or cool the climate. ACTIVATE studies the atmosphere over the western North Atlantic and samples its broad range of aerosol, cloud and meteorological conditions using two aircraft, the UC-12 King Air and HU-25 Falcon. The UC-12 King Air will primarily be used for remote sensing measurements while the HU-25 Falcon will contain a comprehensive instrument payload for detailed in-situ measurements of aerosol, cloud properties, and atmospheric state. A few trace gas measurements will also be onboard the HU-25 Falcon for the measurements of pollution traces, which will contribute to airmass classification analysis. A total of 150 coordinated flights over the western North Atlantic are planned through 6 deployments from 2020-2022. The ACTIVATE science observing strategy intensively targets the shallow cumulus cloud regime and aims to collect sufficient statistics over a broad range of aerosol and weather conditions which enables robust characterization of aerosol-cloud-meteorology interactions. This strategy is implemented by two nominal flight patterns: Statistical Survey and Process Study. The statistical survey pattern involves close coordination between the remote sensing and in-situ aircraft to conduct near coincident sampling at and below cloud base as well as above and within cloud top. The process study

ACTIVATE_TraceGas_AircraftInSitu_Falcon_Data is the trace gas data collected onboard the HU-25 Falcon aircraft via in-situ instrumentation during the ACTIVATE project. ACTIVATE was a 5-year NASA Earth-Venture Sub-Orbital (EVS-3) field campaign. Marine boundary layer clouds play a critical role in Earth’s energy balance and water cycle. These clouds cover more than 45% of the ocean surface and exert a net cooling effect. The Aerosol Cloud meTeorology Interactions oVer the western Atlantic Experiment (ACTIVATE) project was a five-year project that provides important globally-relevant data about changes in marine boundary layer cloud systems, atmospheric aerosols and multiple feedbacks that warm or cool the climate. ACTIVATE studied the atmosphere over the western North Atlantic and sampled its broad range of aerosol, cloud and meteorological conditions using two aircraft, the UC-12 King Air and HU-25 Falcon. The UC-12 King Air was primarily used for remote sensing measurements while the HU-25 Falcon will contain a comprehensive instrument payload for detailed in-situ measurements of aerosol, cloud properties, and atmospheric state. A few trace gas measurements were also onboard the HU-25 Falcon for the measurements of pollution traces, which will contribute to airmass classification analysis. A total of 150 coordinated flights over the western North Atlantic occurred through 6 deployments from 2020-2022. The ACTIVATE science observing strategy intensively targets the shallow cumulus cloud regime and aims to collect sufficient statistics over a broad range of aerosol and weather conditions which enables robust characterization of aerosol-cloud-meteorology interactions. This strategy was implemented by two nominal flight patterns: Statistical Survey and Process Study. The statistical survey pattern involves close coordination between the remote sensing and in-situ aircraft to conduct near coincident sampling at and below cloud base as well as above and within cloud top. The process study pattern involves extensive vertical profiling to characterize the target cloud and surrounding aerosol and meteorological conditions.

ACTIVATE_Satellite_Data_1 is the GOES-16 satellite data supporting the ACTIVATE suborbital campaign.ACTIVATE was a 5-year NASA Earth-Venture Sub-Orbital (EVS-3) field campaign. Marine boundary layer clouds play a critical role in Earth’s energy balance and water cycle. These clouds cover more than 45% of the ocean surface and exert a net cooling effect. The Aerosol Cloud meTeorology Interactions oVer the western Atlantic Experiment (ACTIVATE) project was a five-year project that provides important globally-relevant data about changes in marine boundary layer cloud systems, atmospheric aerosols and multiple feedbacks that warm or cool the climate. ACTIVATE studied the atmosphere over the western North Atlantic and sampled its broad range of aerosol, cloud and meteorological conditions using two aircraft, the UC-12 King Air and HU-25 Falcon. The UC-12 King Air was primarily used for remote sensing measurements while the HU-25 Falcon will contain a comprehensive instrument payload for detailed in-situ measurements of aerosol, cloud properties, and atmospheric state. A few trace gas measurements were also onboard the HU-25 Falcon for the measurements of pollution traces, which will contribute to airmass classification analysis. A total of 150 coordinated flights over the western North Atlantic occurred through 6 deployments from 2020-2022. The ACTIVATE science observing strategy intensively targets the shallow cumulus cloud regime and aims to collect sufficient statistics over a broad range of aerosol and weather conditions which enables robust characterization of aerosol-cloud-meteorology interactions. This strategy was implemented by two nominal flight patterns: Statistical Survey and Process Study. The statistical survey pattern involves close coordination between the remote sensing and in-situ aircraft to conduct near coincident sampling at and below cloud base as well as above and within cloud top. The process study pattern involves extensive vertical profiling to characterize the target cloud and surrounding aerosol and meteorological conditions.

ACTIVATE_MetNav_AircraftInSitu_KingAir_Data is the meteorological and navigational data collected onboard the B-200 King Air aircraft via in-situ instrumentation during the ACTIVATE project. ACTIVATE was a 5-year NASA Earth-Venture Sub-Orbital (EVS-3) field campaign. Marine boundary layer clouds play a critical role in Earth’s energy balance and water cycle. These clouds cover more than 45% of the ocean surface and exert a net cooling effect. The Aerosol Cloud meTeorology Interactions oVer the western Atlantic Experiment (ACTIVATE) project was a five-year project that provides important globally-relevant data about changes in marine boundary layer cloud systems, atmospheric aerosols and multiple feedbacks that warm or cool the climate. ACTIVATE studied the atmosphere over the western North Atlantic and sampled its broad range of aerosol, cloud and meteorological conditions using two aircraft, the UC-12 King Air and HU-25 Falcon. The UC-12 King Air was primarily used for remote sensing measurements while the HU-25 Falcon will contain a comprehensive instrument payload for detailed in-situ measurements of aerosol, cloud properties, and atmospheric state. A few trace gas measurements were also onboard the HU-25 Falcon for the measurements of pollution traces, which will contribute to airmass classification analysis. A total of 150 coordinated flights over the western North Atlantic occurred through 6 deployments from 2020-2022. The ACTIVATE science observing strategy intensively targets the shallow cumulus cloud regime and aims to collect sufficient statistics over a broad range of aerosol and weather conditions which enables robust characterization of aerosol-cloud-meteorology interactions. This strategy was implemented by two nominal flight patterns: Statistical Survey and Process Study. The statistical survey pattern involves close coordination between the remote sensing and in-situ aircraft to conduct near coincident sampling at and below cloud base as well as above and within cloud top. The process study pattern involves extensive vertical profiling to characterize the target cloud and surrounding aerosol and meteorological conditions.Marine boundary layer clouds play a critical role in Earth’s energy balance and water cycle. These clouds cover more than 45% of the ocean surface and exert a net cooling effect. The Aerosol Cloud meTeorology Interactions oVer the western Atlantic Experiment (ACTIVATE) project is a five-year project (January 2019-December 2023) that will provide important globally-relevant data about changes in marine boundary layer cloud systems, atmospheric aerosols and multiple feedbacks that warm or cool the climate. ACTIVATE studies the atmosphere over the western North Atlantic and samples its broad range of aerosol, cloud and meteorological conditions using two aircraft, the UC-12 King Air and HU-25 Falcon. The UC-12 King Air will primarily be used for remote sensing measurements while the HU-25 Falcon will contain a comprehensive instrument payload for detailed in-situ measurements of aerosol, cloud properties, and atmospheric state. A few trace gas measurements will also be onboard the HU-25 Falcon for the measurements of pollution traces, which will contribute to airmass classification analysis. A total of 150 coordinated flights over the western North Atlantic are planned through 6 deployments from 2020-2022. The ACTIVATE science observing strategy intensively targets the shallow cumulus cloud regime and aims to collect sufficient statistics over a broad range of aerosol and weather conditions which enables robust characterization of aerosol-cloud-meteorology interactions. This strategy is implemented by two nominal flight patterns: Statistical Survey and Process Study. The statistical survey pattern involves close coordination between the remote sensing and in-situ aircraft to conduct near coincident sampling at and below cloud base as well as above and within cloud top. The process study pattern

ORACLES_AerosolCloud_AircraftRemoteSensing_Data are remotely sensed aerosol and cloud measurements collected onboard the P-3 Orion or ER-2 aircraft during the ObseRvations of Aerosols above CLouds and their intEractionS (ORACLES) campaign. These measurements were collected from August 19, 2016 – October 27, 2016, August 1, 2017 – September 4, 2017 and September 21, 2018 – October 27, 2018. ORACLES provides multi-year airborne observations over the complete vertical column of key parameters that drive aerosol-cloud interactions in the southeast Atlantic, an area with some of the largest inter-model differences in aerosol forcing assessments on the planet. The P-3 Orion aircraft was utilized as a low-flying platform for simultaneous in situ and remote sensing measurements of aerosols and clouds and was supplemented by ER-2 remote sensing during the 2016 campaign. Data collection for this product is complete.Southern Africa produces almost one-third of the Earth’s biomass burning aerosol particles. The ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) experiment was a five year investigation with three intensive observation periods (August 19, 2016 – October 27, 2016; August 1, 2017 – September 4, 2017; September 21, 2018 – October 27, 2018) and was designed to study key processes that determine the climate impacts of African biomass burning aerosols. ORACLES provided multi-year airborne observations over the complete vertical column of the key parameters that drive aerosol-cloud interactions in the southeast Atlantic, an area with some of the largest inter-model differences in aerosol forcing assessments. These inter-model differences in aerosol and cloud distributions, as well as their combined climatic effects in the SE Atlantic are partly due to the persistence of aerosols above clouds. The varying separation of cloud and aerosol layers sampled during ORACLES allow for a process-oriented understanding of how variations in radiative heating profiles impact cloud properties, which is expected to improve model simulations for other remote regions experience long-range aerosol transport above clouds. ORACLES utilized two NASA aircraft, the P-3 and ER-2. The P-3 was used as a low-flying platform for simultaneous in situ and remote sensing measurements of aerosols and clouds in all three campaigns, supplemented by ER-2 remote sensing in 2016. ER-2 observations will be used to enhance satellite-based remote sensing by resolving variability within a particular scene, and by guiding the development of new and improved remote sensing techniques.

ORACLES_Cloud_AircraftInSitu_Data are in situ cloud measurements collected onboard the P-3 Orion or ER-2 aircraft during the ObseRvations of Aerosols above CLouds and their intEractionS (ORACLES) campaign. These measurements were collected from August 19, 2016 – October 27, 2016, August 1, 2017 – September 4, 2017 and September 21, 2018 – October 27, 2018. ORACLES provides multi-year airborne observations over the complete vertical column of key parameters that drive aerosol-cloud interactions in the southeast Atlantic, an area with some of the largest inter-model differences in aerosol forcing assessments on the planet. The P-3 Orion aircraft was utilized as a low-flying platform for simultaneous in situ and remote sensing measurements of aerosols and clouds and was supplemented by ER-2 remote sensing during the 2016 campaign. Data collection for this product is complete.Southern Africa produces almost one-third of the Earth’s biomass burning aerosol particles. The ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) experiment was a five year investigation with three intensive observation periods (August 19, 2016 – October 27, 2016; August 1, 2017 – September 4, 2017; September 21, 2018 – October 27, 2018) and was designed to study key processes that determine the climate impacts of African biomass burning aerosols. ORACLES provided multi-year airborne observations over the complete vertical column of the key parameters that drive aerosol-cloud interactions in the southeast Atlantic, an area with some of the largest inter-model differences in aerosol forcing assessments. These inter-model differences in aerosol and cloud distributions, as well as their combined climatic effects in the SE Atlantic are partly due to the persistence of aerosols above clouds. The varying separation of cloud and aerosol layers sampled during ORACLES allow for a process-oriented understanding of how variations in radiative heating profiles impact cloud properties, which is expected to improve model simulations for other remote regions experience long-range aerosol transport above clouds. ORACLES utilized two NASA aircraft, the P-3 and ER-2. The P-3 was used as a low-flying platform for simultaneous in situ and remote sensing measurements of aerosols and clouds in all three campaigns, supplemented by ER-2 remote sensing in 2016. ER-2 observations will be used to enhance satellite-based remote sensing by resolving variability within a particular scene, and by guiding the development of new and improved remote sensing techniques.

The MODIS Airborne Simulator (MAS) Level-2 Cloud Data product (MASL2CLD) consists of cloud optical and physical parameters. These parameters are derived using remotely sensed infrared and near infrared solar reflected radiances. Multispectral images of the reflectance and brightness temperature at 10 wavelengths between 0.66 and 13.98nm were used to derive the probability of clear sky (or cloud), cloud thermodynamic phase, and the optical thickness and effective radius of liquid water and ice clouds.MASL2CLD product files are stored in Hierarchical Data Format (HDF-EOS). All gridded cloud parameters are stored as Scientific Data Sets (SDS) within the file.For more information and for a list of MAS campaign flights visit ladsweb at:https://ladsweb.modaps.eosdis.nasa.gov/missions-and-measurements/mas/

FIREXAQ_Cloud_AircraftInSitu_DC8_Data are in-situ cloud measurements collected onboard the DC8 aircraft during FIREX-AQ. This product features data collected by the CDP, CPSPD, and CAPS. Data collection for this product is complete.Completed during summer 2019, FIREX-AQ utilized a combination of instrumented airplanes, satellites, and ground-based instrumentation. Detailed fire plume sampling was carried out by the NASA DC-8 aircraft, which had a comprehensive instrument payload capable of measuring over 200 trace gas species, as well as aerosol microphysical, optical, and chemical properties. The DC-8 aircraft completed 23 science flights, including 15 flights from Boise, Idaho and 8 flights from Salina, Kansas. NASA’s ER-2 completed 11 flights, partially in support of the FIREX-AQ effort. The ER-2 payload was made up of 8 satellite analog instruments and provided critical fire information, including fire temperature, fire plume heights, and vegetation/soil albedo information. NOAA provided the NOAA-CHEM Twin Otter and the NOAA-MET Twin Otter aircraft to measure chemical processing in the lofted plumes of Western wildfires. The NOAA-CHEM Twin Otter focused on nighttime plume chemistry, from which data is archived at the NASA Atmospheric Science Data Center (ASDC). The NOAA-MET Twin Otter collected measurements of air movements at fire boundaries with the goal of understanding the local weather impacts of fires and the movement patterns of fires. NOAA-MET Twin Otter data will be archived at the ASDC in the future. Additionally, a ground-based station in McCall, Idaho and several mobile laboratories provided in-situ measurements of aerosol microphysical and optical properties, aerosol chemical compositions, and trace gas species. The Fire Influence on Regional to Global Environments and Air Quality (FIREX-AQ) campaign was a NOAA/NASA interagency intensive study of North American fires to gain an understanding on the integrated impact of the fire emissions on the tropospheric chemistry and composition and to assess the satellite’s capability for detecting fires and estimating fire emissions. The overarching goal of FIREX-AQ was to provide measurements of trace gas and aerosol emissions for wildfires and prescribed fires in great detail, relate them to fuel and fire conditions at the point of emission, characterize the conditions relating to plume rise, and follow plumes downwind to understand chemical transformation and air quality impacts.