ACTIVATE_Aerosol_AircraftInSitu_Falcon_Data is the aerosol data collected onboard the HU-25 Falcon aircraft via in-situ instrumentation during the ACTIVATE project. ACTIVATE was a 5-year NASA Earth-Venture Sub-Orbital (EVS-3) field campaign. Marine boundary layer clouds play a critical role in Earth’s energy balance and water cycle. These clouds cover more than 45% of the ocean surface and exert a net cooling effect. The Aerosol Cloud meTeorology Interactions oVer the western Atlantic Experiment (ACTIVATE) project was a five-year project that provides important globally-relevant data about changes in marine boundary layer cloud systems, atmospheric aerosols and multiple feedbacks that warm or cool the climate. ACTIVATE studied the atmosphere over the western North Atlantic and sampled its broad range of aerosol, cloud and meteorological conditions using two aircraft, the UC-12 King Air and HU-25 Falcon. The UC-12 King Air was primarily used for remote sensing measurements while the HU-25 Falcon will contain a comprehensive instrument payload for detailed in-situ measurements of aerosol, cloud properties, and atmospheric state. A few trace gas measurements were also onboard the HU-25 Falcon for the measurements of pollution traces, which will contribute to airmass classification analysis. A total of 150 coordinated flights over the western North Atlantic occurred through 6 deployments from 2020-2022. The ACTIVATE science observing strategy intensively targets the shallow cumulus cloud regime and aims to collect sufficient statistics over a broad range of aerosol and weather conditions which enables robust characterization of aerosol-cloud-meteorology interactions. This strategy was implemented by two nominal flight patterns: Statistical Survey and Process Study. The statistical survey pattern involves close coordination between the remote sensing and in-situ aircraft to conduct near coincident sampling at and below cloud base as well as above and within cloud top. The process study pattern involves extensive vertical profiling to characterize the target cloud and surrounding aerosol and meteorological conditions.

ACTIVATE_MetNav_AircraftInSitu_Falcon_Data is the meteorological and navigational data collected onboard the HU-25 Falcon aircraft via in-situ instrumentation during the ACTIVATE project. ACTIVATE was a 5-year NASA Earth-Venture Sub-Orbital (EVS-3) field campaign. Marine boundary layer clouds play a critical role in Earth’s energy balance and water cycle. These clouds cover more than 45% of the ocean surface and exert a net cooling effect. The Aerosol Cloud meTeorology Interactions oVer the western Atlantic Experiment (ACTIVATE) project was a five-year project that provides important globally-relevant data about changes in marine boundary layer cloud systems, atmospheric aerosols and multiple feedbacks that warm or cool the climate. ACTIVATE studied the atmosphere over the western North Atlantic and sampled its broad range of aerosol, cloud and meteorological conditions using two aircraft, the UC-12 King Air and HU-25 Falcon. The UC-12 King Air was primarily used for remote sensing measurements while the HU-25 Falcon will contain a comprehensive instrument payload for detailed in-situ measurements of aerosol, cloud properties, and atmospheric state. A few trace gas measurements were also onboard the HU-25 Falcon for the measurements of pollution traces, which will contribute to airmass classification analysis. A total of 150 coordinated flights over the western North Atlantic occurred through 6 deployments from 2020-2022. The ACTIVATE science observing strategy intensively targets the shallow cumulus cloud regime and aims to collect sufficient statistics over a broad range of aerosol and weather conditions which enables robust characterization of aerosol-cloud-meteorology interactions. This strategy was implemented by two nominal flight patterns: Statistical Survey and Process Study. The statistical survey pattern involves close coordination between the remote sensing and in-situ aircraft to conduct near coincident sampling at and below cloud base as well as above and within cloud top. The process study pattern involves extensive vertical profiling to characterize the target cloud and surrounding aerosol and meteorological conditions.

ACTIVATE_Cloud_AircraftInSitu_Falcon_Data is the cloud data collected onboard the HU-25 Falcon aircraft via in-situ instrumentation during the ACTIVATE project. ACTIVATE was a 5-year NASA Earth-Venture Sub-Orbital (EVS-3) field campaign. Marine boundary layer clouds play a critical role in Earth’s energy balance and water cycle. These clouds cover more than 45% of the ocean surface and exert a net cooling effect. The Aerosol Cloud meTeorology Interactions oVer the western Atlantic Experiment (ACTIVATE) project was a five-year project that provides important globally-relevant data about changes in marine boundary layer cloud systems, atmospheric aerosols and multiple feedbacks that warm or cool the climate. ACTIVATE studied the atmosphere over the western North Atlantic and sampled its broad range of aerosol, cloud and meteorological conditions using two aircraft, the UC-12 King Air and HU-25 Falcon. The UC-12 King Air was primarily used for remote sensing measurements while the HU-25 Falcon will contain a comprehensive instrument payload for detailed in-situ measurements of aerosol, cloud properties, and atmospheric state. A few trace gas measurements were also onboard the HU-25 Falcon for the measurements of pollution traces, which will contribute to airmass classification analysis. A total of 150 coordinated flights over the western North Atlantic occurred through 6 deployments from 2020-2022. The ACTIVATE science observing strategy intensively targets the shallow cumulus cloud regime and aims to collect sufficient statistics over a broad range of aerosol and weather conditions which enables robust characterization of aerosol-cloud-meteorology interactions. This strategy was implemented by two nominal flight patterns: Statistical Survey and Process Study. The statistical survey pattern involves close coordination between the remote sensing and in-situ aircraft to conduct near coincident sampling at and below cloud base as well as above and within cloud top. The process study pattern involves extensive vertical profiling to characterize the target cloud and surrounding aerosol and meteorological conditions.

OWLETS1_Pandora_Data_1 is the Ozone Water-Land Environmental Transition Study (OWLETS-1) ozone and nitrogen dioxide data collected by the NASA GSFC Pandora Spectrometer Project located at NASA Langley Research Center, the Chesapeake Bay Bridge Tunnel, SERC Research Vessel, Virginia Commonwealth University (VCU) and Wallops Flight Facility during the OWLETS field campaign. OWLETS was supported by the NASA Science Innovation Fund (SIF). Data collection is complete.Coastal regions have typically posed a challenge for air quality researchers due to a lack of measurements available over water and water-land boundary transitions. Supported by NASA’s Science Innovation Fund (SIF), the Ozone Water-Land Environmental Transition Study (OWLETS) field campaign examined ozone concentrations and gradients over the Chesapeake Bay from July 5, 2017 – August 3, 2017, with twelve intensive measurement days occurring during this time period. OWLETS utilized a unique combination of instrumentation, including aircraft, TOLNet ozone lidars (NASA Goddard Space Flight Center Tropospheric Ozone Differential Absorption Lidar and NASA Langley Research Center Mobile Ozone Lidar), UAV/drones, ozonesondes, AERONET sun photometers, and mobile and ship-based measurements, to characterize the land-water differences in ozone and other pollutants. Two main research sites were established as part of the campaign: an over-land site at NASA LaRC, and an over-water site at the Chesapeake Bay Bridge Tunnel. These two research sites were established to provide synchronous vertical measurements of meteorology and pollutants over water and over land. In combination with mobile observations between the two sites, pollutant gradients were able to be observed and used to better understand the fundamental processes occurring at the land-water interface. OWLETS-2 was completed from June 6, 2018 – July 6, 2018 in the upper Chesapeake Bay region. Research sites were established at the University of Maryland, Baltimore County (UMBC), Hart Miller Island (HMI), and Howard University Beltsville (HUBV), with HMI representing the over-water location and UMBC and HUBV representing the over-land sites. Similar measurements were carried out to further characterize water-land gradients in the upper Chesapeake Bay. The measurements completed during OWLETS are of importance in enhancing air quality models, and improving future satellite retrievals, particularly, NASA’s Tropospheric Emissions: Monitoring of Pollution, which is scheduled to launch in 2022.

LISTOS_AircraftRemoteSensing_NASAAircraft_Data is the Long Island Sound Tropospheric Ozone Study (LISTOS) remote sensing data collected onboard the NASA aircraft during the LISTOS field campaign. This product is a result of a joint effort across multiple agencies, including NASA, NOAA, the EPA Northeast States for Coordinated Air Use Management (NESCAUM), Maine Department of Environmental Protection, New Jersey Department of Environmental Protection, New York State Department of Environmental Conservation and several research groups at universities. Data collection is complete.The New York City (NYC) metropolitan area (comprised of portions of New Jersey, New York, and Connecticut in and around NYC) is home to over 20 million people, but also millions of people living downwind in neighboring states. This area continues to persistently have challenges meeting past and recently revised federal health-based air quality standards for ground-level ozone, which impacts the health and well-being of residents living in the area. A unique feature of this chronic ozone problem is the pollution transported in a northeast direction out of NYC over Long Island Sound. The relatively cool waters of Long Island Sound confine the pollutants in a shallow and stable marine boundary layer. Afternoon heating over coastal land creates a sea breeze that carries the air pollution inland from the confined marine layer, resulting in high ozone concentrations in Connecticut and, at times, farther east into Rhode Island and Massachusetts. To investigate the evolving nature of ozone formation and transport in the NYC region and downwind, Northeast States for Coordinated Air Use Management (NESCAUM) launched the Long Island Sound Tropospheric Ozone Study (LISTOS). LISTOS was a multi-agency collaborative study focusing on Long Island Sound and the surrounding coastlines that continually suffer from poor air quality exacerbated by land/water circulation. The primary measurement observations took place between June-September 2018 and include in-situ and remote sensing instrumentation that were integrated aboard three aircraft, a network of ground sites, mobile vehicles, boat measurements, and ozonesondes. The goal of LISTOS was to improve the understanding of ozone chemistry and sea breeze transported pollution over Long Island Sound and its coastlines. LISTOS also provided NASA the opportunity to test air quality remote sensing retrievals with the use of its airborne simulators (GEOstationary Coastal and Air Pollution Events (GEO-CAPE) Airborne Simulator (GCAS), and Geostationary Trace gas and Aerosol Sensory Optimization (GeoTASO)) for the preparation of the Tropospheric Emissions; Monitoring of Pollution (TEMPO) observations for monitoring air quality from space. LISTOS also helped collaborators in the validation of Tropospheric Monitoring Instrument (TROPOMI) science products, with use of airborne- and ground-based measurements of ozone, NO2, and HCHO.

FIREXAQ_TraceGas_AircraftInSitu_DC8_Data are in-situ trace gas measurements conducted onboard the DC8 aircraft during FIREX-AQ. This product features data collected from the TOGA, WAS, DACOM. CAMS, PTR-MS and LGR instruments. Data collection for this product is complete.Completed during summer 2019, FIREX-AQ utilized a combination of instrumented airplanes, satellites, and ground-based instrumentation. Detailed fire plume sampling was carried out by the NASA DC-8 aircraft, which had a comprehensive instrument payload capable of measuring over 200 trace gas species, as well as aerosol microphysical, optical, and chemical properties. The DC-8 aircraft completed 23 science flights, including 15 flights from Boise, Idaho and 8 flights from Salina, Kansas. NASA’s ER-2 completed 11 flights, partially in support of the FIREX-AQ effort. The ER-2 payload was made up of 8 satellite analog instruments and provided critical fire information, including fire temperature, fire plume heights, and vegetation/soil albedo information. NOAA provided the NOAA-CHEM Twin Otter and the NOAA-MET Twin Otter aircraft to measure chemical processing in the lofted plumes of Western wildfires. The NOAA-CHEM Twin Otter focused on nighttime plume chemistry, from which data is archived at the NASA Atmospheric Science Data Center (ASDC). The NOAA-MET Twin Otter collected measurements of air movements at fire boundaries with the goal of understanding the local weather impacts of fires and the movement patterns of fires. NOAA-MET Twin Otter data will be archived at the ASDC in the future. Additionally, a ground-based station in McCall, Idaho and several mobile laboratories provided in-situ measurements of aerosol microphysical and optical properties, aerosol chemical compositions, and trace gas species. The Fire Influence on Regional to Global Environments and Air Quality (FIREX-AQ) campaign was a NOAA/NASA interagency intensive study of North American fires to gain an understanding on the integrated impact of the fire emissions on the tropospheric chemistry and composition and to assess the satellite’s capability for detecting fires and estimating fire emissions. The overarching goal of FIREX-AQ was to provide measurements of trace gas and aerosol emissions for wildfires and prescribed fires in great detail, relate them to fuel and fire conditions at the point of emission, characterize the conditions relating to plume rise, and follow plumes downwind to understand chemical transformation and air quality impacts.

OWLETS2_Pandora_Data_1 is the Ozone Water-Land Environmental Transition Study (OWLETS-2) ozone and nitrogen dioxide data collected by the NASA GSFC Pandora Spectrometer Project located at various ground sites and onboard the SERC research vessel during the OWLETS-2 field campaign. OWLETS was supported by the NASA Science Innovation Fund (SIF). Data collection is complete.Coastal regions have typically posed a challenge for air quality researchers due to a lack of measurements available over water and water-land boundary transitions. Supported by NASA’s Science Innovation Fund (SIF), the Ozone Water-Land Environmental Transition Study (OWLETS) field campaign examined ozone concentrations and gradients over the Chesapeake Bay from July 5, 2017 – August 3, 2017, with twelve intensive measurement days occurring during this time period. OWLETS utilized a unique combination of instrumentation, including aircraft, TOLNet ozone lidars (NASA Goddard Space Flight Center Tropospheric Ozone Differential Absorption Lidar and NASA Langley Research Center Mobile Ozone Lidar), UAV/drones, ozonesondes, AERONET sun photometers, and mobile and ship-based measurements, to characterize the land-water differences in ozone and other pollutants. Two main research sites were established as part of the campaign: an over-land site at NASA LaRC, and an over-water site at the Chesapeake Bay Bridge Tunnel. These two research sites were established to provide synchronous vertical measurements of meteorology and pollutants over water and over land. In combination with mobile observations between the two sites, pollutant gradients were able to be observed and used to better understand the fundamental processes occurring at the land-water interface. OWLETS-2 was completed from June 6, 2018 – July 6, 2018 in the upper Chesapeake Bay region. Research sites were established at the University of Maryland, Baltimore County (UMBC), Hart Miller Island (HMI), and Howard University Beltsville (HUBV), with HMI representing the over-water location and UMBC and HUBV representing the over-land sites. Similar measurements were carried out to further characterize water-land gradients in the upper Chesapeake Bay. The measurements completed during OWLETS are of importance in enhancing air quality models, and improving future satellite retrievals, particularly, NASA’s Tropospheric Emissions: Monitoring of Pollution, which is scheduled to launch in 2022.

SOLVE2_TraceGas_AircraftRemoteSensing_DC8_Data is the remotely sensed trace gas data for the DC-8 aircraft collected during the SAGE III Ozone Loss and Validation Experiment II (SOLVE II). Data were collected by the Gas and Aerosol Measurement Sensor/Langley Airborne A-Band Spectrometer (GAMS/LAABS). Data collection for this product is complete.The SOLVE campaign was a NASA multi-program effort of the Upper Atmosphere Research Program (UARP), Atmospheric Effects of Aviation Project (AEAP), Atmospheric Chemistry Modeling and Analysis Program (ACMAP) and Earth Observing System (EOS) of NASA’s Earth Science Enterprise (ESE). SOLVE’s primary objective was for calibrating and validating the Stratospheric Aerosol and Gas Experiment (SAGE) III satellite measurements, while examining the processes that controlled ozone levels at a mid- to high-latitude range. The major goal of SAGE III was to quantitatively assess ozone loss at high latitudes. SOLVE was a two-phase experiment, the first phase, SOLVE, occurred during the fall of 1999 through the spring of 2000. The second phase, SOLVE II, occurred during the winter of 2003.SOLVE took place in the Arctic high-latitude region during the winter. The polar ozone depletion processes cause by human-produced chlorine and bromine are most active in mid-to-late winter and early spring in the high Arctic. In order to conduct this validation experiment, NASA deployed the NASA ER-2 aircraft and NASA DC-8 aircraft. The ER-2 measured a variety of atmospheric data, including ozone (O3), H2O, CO2, ClONO2, HCl, ClO/BrO, and Cl2O2. The DC-8 aircraft measured ozone, ClO/BrO, and aerosol, among other atmospheric data. SOLVE also utilized balloon platforms, ground-based instruments, and collaborations with the German Aerospace Center’s (DLR) FALCON aircraft equipped with the OLEX Lidar to achieve the mission objectives. Overall, the campaign had 28 flights, with SOLVE featuring 17 total flights among the different aircrafts and SOLVE II featuring 11 flights.