This dataset contains the Level 1 (L1) raw radar event data recorded at Next Generation Radar (NEXRAD) sites and collected by the NOAA National Weather Service (NWS) Radar Operations Center (ROC) for specific radar case studies. It includes only the Level 1 data that has been used for algorithm development and verification by the ROC and its partners. NEXRAD operational sites and test sites are used. The dataset period of record starts in 2008 with new data added approximately every year. The number of case studies per year ranges from 1 to 33, with an average of approximately 10 per year. The data files are in the native compressed file format as Time Series (TS) Archive. The data files have been aggregated by event and by hour for the archive with a total data volume of approximately 20 TB. An event summary file with descriptive information is included for each case study.

These data represent Next-Generation Radar (NEXRAD) and Terminal Doppler Weather Radar (TDWR) weather radar stations within the US. The NEXRAD radar stations are maintained and operated by the National Oceanic and Atmospheric Administration. The TDWR radar stations are maintained and operated by the Federal Aviation Administration. Both radar's are pulsed Doppler types that measure reflectivity out to 460 km, and radial velocity and spectrum width out to 300 km for NEXRAD and 90 km for TDWR. Both radars automatically scan the atmosphere from the surface to 70,000 feet using a rotating parabolic antenna.

These data represent an inventory of the national impacts of wind turbine interference with NEXRAD radar stations. This inventory was developed by the NOAA Radar Operations Center (ROC) to establish variable zones that delineate the possible impacts that wind turbines may have on radar operations. The inventory scheme includes four zones that take in to account terrain, distance, and the number of elevation angles impacted. ROC requests various degrees of consultation with the developer depending on the zone. No Build - No wind turbines permitted Mitigation Zone - Significant impacts likely Consultation Zone - Significant impacts possible Notification Zone - Impacts not likely

NOAA NEXRAD Quantitative Precipitation Estimation (QPE) Climate Data Record (CDR) is created from the Radar Multi-Radar/Multi-Sensor (MRMS) Reanalysis to produce severe weather and precipitation products for improved decision-making capability to improve severe weather forecasts and warnings, hydrology, aviation, and numerical weather prediction. The data cover a time period from 2002-01-01 to 2011-12-31. NOAA's NEXRAD reanalysis consists of two primary components; (1) Severe weather and radar-reflectivity data generation, (2) Quantitative Precipitation Estimate (including associated precipitation variables and merged rain gauge and radar estimation). This document focuses on the second component of NOAA's NEXRAD reanalysis - the Quantitative Precipitation Estimate (QPE). The primary files generated within this data set are radar-only and radar- gauge (ROQPE, GCQPE, and MOS2D) merged precipitation products as well as ancillary information on precipitation type (PRATE and PFLAG) and radar quality (RQIND). The initial data set covers the time period from January 2002 - December 2011. Radar-only reflectivity, Gauge, Precipitation Flag, and Radar Quality Index for 5-minute data at 1km regular grid over CONUS. Radar only Radar-Gauge Quantitative Precipitation Estimates at hourly scale at 1km regular grid over CONUS. MRMS Quantitative Precipitation Estimation (QPE) uses the most advanced radar technologies and provides high-resolution information about precipitation types and amounts for the nation. The data are stored in netCDF version 4.0 files that include the necessary metadata and supplementary data fields. Data set provides information that can be useful for identification of various types of precipitation, estimation of radar reflectivity, recognition of storm patterns, forecasting technologies for rainfall estimation, and associating different phases of precipitation such as hail freezing rain and snow with radar observations.

NOAA NEXRAD Quantitative Precipitation Estimation (QPE) Climate Data Record (CDR) is created from the Radar Multi-Radar/Multi-Sensor (MRMS) Reanalysis to produce severe weather and precipitation products for improved decision-making capability to improve severe weather forecasts and warnings, hydrology, aviation, and numerical weather prediction. The data cover a time period from 2002-01-01 to 2011-12-31. NOAA's NEXRAD reanalysis consists of two primary components; (1) Severe weather and radar-reflectivity data generation, (2) Quantitative Precipitation Estimate (including associated precipitation variables and merged rain gauge and radar estimation). This document focuses on the second component of NOAA's NEXRAD reanalysis - the Quantitative Precipitation Estimate (QPE). The primary files generated within this data set are radar-only and radar- gauge (ROQPE, GCQPE, and MOS2D) merged precipitation products as well as ancillary information on precipitation type (PRATE and PFLAG) and radar quality (RQIND). The initial data set covers the time period from January 2002 - December 2011. Radar-only reflectivity, Gauge, Precipitation Flag, and Radar Quality Index for 5-minute data at 1km regular grid over CONUS. Radar only Radar-Gauge Quantitative Precipitation Estimates at hourly scale at 1km regular grid over CONUS. MRMS Quantitative Precipitation Estimation (QPE) uses the most advanced radar technologies and provides high-resolution information about precipitation types and amounts for the nation. The data are stored in netCDF version 4.0 files that include the necessary metadata and supplementary data fields. Data set provides information that can be useful for identification of various types of precipitation, estimation of radar reflectivity, recognition of storm patterns, forecasting technologies for rainfall estimation, and associating different phases of precipitation such as hail freezing rain and snow with radar observations.

*This version has been superseded by a newer version. It is highly recommended for users to access the current version. Users should only access this superseded version for special cases, such as reproducing studies. If necessary, this version can be accessed by contacting NCEI.* The NOAA Global Surface Temperature Dataset (NOAAGlobalTemp) is a blended product from two independent analysis products: the Extended Reconstructed Sea Surface Temperature (ERSST) analysis and the land surface temperature (LST) analysis using the Global Historical Climatology Network (GHCN) temperature database. The data is merged into a monthly global surface temperature dataset dating back from 1850 to the present. The monthly product output is in gridded (5 degree x 5 degree) and time series formats. The product is used in climate monitoring assessments of near-surface temperatures on a global scale. Changes to the data in version 5.1 included: removing the EOT filtering; filling in data gaps over the polar regions; and extending the beginning data coverage from 1880 to 1850.

The NOAA Profiler Network (NPN) radars provide vertical profiles of horizontal wind speed and direction from near the surface to above the tropopause. The system also generates data quality related statistics such as signal-to-noise ratio (SNR) and spectrum width. There are three systems in Alaska (Talkeetna, Anchorage, and Homer), with an additional testbed site in Norman, OK. The location and ICAO ID for the NOAA NPN sites are: Norman, OK - ROCO2/KROC; Homer, AK - HWPA2/KHWP; Talkeetna, AK - TLKA2/KTLK; and Anchorage, AK - AWPA2/KAWP. Each wind profiler unit uses preprogrammed operational modes to determine the speed and direction of the wind at different heights directly above the unmanned radar site. This dataset covers the newly refreshed NPN upper air wind data, beginning with 2020. A previous NPN project covered 1991 - 2006 and is available in BUFR format for winds, moments, RASS, and surface file types.