This record describes multibeam echosounder data collected on RV Investigator voyage IN2017_V04, 'The whole enchilada: from production to predation in Tasman Sea ecosystems' which departed Brisbane on the 31-Aug-2017 and returned to Sydney on the 18 September 2017. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry and backscatter information. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 91 files totalling 23.5 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data. Processed data has had outliers removed. Processed line data are available in *.gsf and ascii format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes ME 70 scientific multibeam fisheries echosounder data collected on RV Investigator voyage IN2017_V04, 'The whole enchilada: from production to predation in Tasman Sea ecosystems' which departed Brisbane on the 31-Aug-2017 and returned to Sydney on the 18 September 2017. The Simrad ME70 scientific multibeam echosounder acquired acoustic backscatter data through the water column. The echosounder's frequency range is from 70 kHz to 120 kHz. The ME70 logged sporadically for most of the voyage, but logged continuously near Montague Island. Data are stored in Simrad *.all raw format at CSIRO. There are 173 files totalling 15 GB of raw data in this dataset. No processing has been conducted on this data. Additional information regarding this dataset, including the settings used, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2017_V03, 'Sampling the abyss: latitudinal biodiversity patterns along the base of Australia’s eastern continental margin' which departed Bell Bay on the 15 May 2017 and returned to Brisbane on the 16 June 2017. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry and backscatter information at sampling sites along the East Coast of Australia, including several Commonwealth Marine Reserves. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in *.all raw format for bathymetry and backscatter at CSIRO. There are 675 files totalling 16.6 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on the RV Investigator voyage IN2023_V04, International nutrient inter-comparison Voyage (INIV) which departed Hobart on the 05/06/23 and returned to Hobart on the 18/06/23. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information and watercolumn backscatter in the Southern Ocean Southwest of Hobart. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 799 files totalling 47.1 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2015_V03, which departed Brisbane on the 3rd June 2015 and arrived Sydney on 18th June 2015. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry and backscatter information in the Tasman Sea. Ping rate varied according to depth. Data are stored in *.all raw format at CSIRO Oceans and Atmosphere. There are 368 files totalling 18.2 GB of raw data in this dataset. 31 sound velocity profiles were applied to this data during data acquisition. Tide corrections were not applied to the processed data. Processed data are available in XYZ and GSF format. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2017_E02, Gear Trials which departed Hobart on the 31-March-2017 and returned to Hobart on the 2-April-2017. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information between/around the Huon marine reserve, south east Tasmania. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO. There are 42 files totalling 2.24 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections [were/were not] applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2016_V04, 'Influence of temperature and nutrient supply on the biogeochemical function and diversity of ocean microbes' which departed Sydney on the 31-Aug-2016 and returned to Brisbane on the 23-Sept-2016. The Kongsberg EM710 MKII multibeam echosounder was used to acquire seafloor bathymetry, backscatter information and watercolumn backscatter between/around the shelf and upper slopes of the New South Wales coast. The EM710 MKII provides a 0.5° by 1° transmit and receive angular resolution respectively. The echosounder's nominal frequency range is from 40 to 100 kHz. Data are stored in .all raw format for bathymetry and backscatter and .wcd format for watercolumn backscatter at CSIRO Oceans and Atmosphere. There are 368 files totalling 27.1 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format is corrected for motion and position. Tide corrections were not applied to the processed data. Processed data has had outliers removed. Processed line data is available in *.gsf and ascii format and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including further information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2018_V06, which departed Hobart on the 22-Nov-2018 and returned to Hobart on the 19-Dec-2018. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry, backscatter information between/around Huon, Tasman Fracture Marine Parks and the St Helens seamount, Tasmania. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in *.all raw format for bathymetry and backscatter at CSIRO. There are 421 files totaling 27.0 GB of raw data in this dataset. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections [were/were not] applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2015_V03, which departed Brisbane on the 3rd June 2015 and arrived Sydney on 18th June 2015. The Kongsberg EM710 multibeam echosounder was used to acquire seafloor bathymetry and backscatter information in Tasman Sea. Ping rate varied according to depth. Data are stored in *.all raw format at CSIRO Oceans and Atmosphere. There are 168 files totaling 18.4 GB of raw data in this dataset. 31 sound velocity profiles were applied to this data during data acquisition. Tide corrections were not applied to the processed data. Processed data are available in XYZ and GSF format. Additional information regarding this dataset is contained in the GSM data acquisition and processing report. Additional data products available on request.

This record describes multibeam echosounder data collected on RV Investigator voyage IN2017_E03, Equipment Commissioning Sea Trials, which departed Brisbane on the 20th August 2017 and returned to Brisbane on the 24th of August 2017. The Kongsberg EM122 multibeam echosounder was used to acquire seafloor bathymetry and backscatter information off the coast of Brisbane. The EM122 provides a 1 degree by 1 degree angular resolution. The echosounder's nominal frequency is 12 kHz. Data are stored in *.all raw format for bathymetry and backscatter at CSIRO. There are 69 files totaling 1.25 GB of raw data in this dataset. A patch test calibration was performed during this voyage to obtain roll, pitch and yaw calibration values. Sound velocity profiles were applied to this data during data acquisition. Bathymetry data contained in *.all format are corrected for motion and position. Tide corrections were not applied to the processed data. Processed data had outliers removed. Processed line data are available in *.gsf and ascii format, and processed bathymetry and backscatter grids in geotiff format. Additional information regarding this dataset, including information on processing streams, is contained in the GSM data acquisition and processing report. Additional data products may be available on request.