데이터셋 상세
미국
CAMEX-3 ATMOSPHERIC EMITTED RADIANCE INTERFEROMETER (AERI) V1
The Atmospheric Emitted Radiance Interferometer (AERI) was used to make atmospheric temperature and moisture retrievals. AERI provides absolutely calibrated radiances which can be used for forward calculation comparisons of radiosonde and LIDAR (for CAMEX-3, the SRL) profiles and provides a reference to the airborne and ground based remote sensing instruments. Additionally, AERI radiances contain valuable temperature and water vapor information which can be used to retrieve planetary boundary layer thermodynamics. The University of Wisconsin-Madison, Space Science and Engineering Center was responsible for the AERI data collection during CAMEX-3 campaign.
데이터 정보
연관 데이터
CAMEX-4 AEROSONDE V1
공공데이터포털
The CAMEX-4 Aerosonde dataset contains temperature, humidity, and atmospheric pressure measurements collected to study the boundary layer below levels where traditional hurricane reconnasissance aircaft fly. The Aerosonde is an unmanned aerial vehicle with a wingspan of 2.9 meters (~9 feet) weighing approximately 14 kg (~31 lbs). Carrying a payload of air pressure, temperature and humidity probes, the aircraft can fly at altitudes from near the surface to 21,000 feet at speeds of 50-95 mph for periods of up to 30 hours. Controlled by dual computers and navigated by GPS, the Aerosonde is designed to economically collect meteorological data over a wide area.
CAMEX-3 NAST-I RADIANCE PRODUCTS V1
공공데이터포털
The National Polar-orbiting Operational Environmental Satellite System (NPOESS) Atmospheric Sounding Testbed (NAST) is a suite of airborne infrared and microwave spectrometers, being developed for the Integrated Program Office (IPO), that will be flown on the NASA high altitude ER-2 aircraft as part of the risk reduction effort for NPOESS. In addition to their stand-alone scientific value, data from these airborne instruments will be used to simulate possible satellite-based radiance measurements, therefore enabling experimental validation of instrument system specifications and data processing techniques for future advanced atmospheric remote sensors (e.g., the proposed sounder component for NPOESS).
CAMEX-3 ANDROS ISLAND RAWINSONDE AND RADIOSONDES V1
공공데이터포털
In support of CAMEX-3, numerous radiosonde and rawinsondes were launched from Andros Island, which consisted of instruments manufactured by VIS and Vaisala. Some sondes were GPS or LORAN located so that winds aloft could be determined without ground based tracking systems. Data from the sondes were used to validate several ground based instruments observing the lower troposphere.
CAMEX-4 MIPS SODAR V1
공공데이터포털
The University of Alabama in Huntsville (UAH) Mobile Integrated Profiling System (MIPS) is a mobile atmospheric profiling system. It includes a 915 MHz Doppler profiler, lidar ceilometer, 12 channel microwave profiling radiometer, Doppler Sodar, Radio Acoustic Sounding System (RASS), Field Mills, and surface observing station. This dataset consists of cdf and mom files tarred together for a day. The 'cdf' file collects 15 minute average 3-D wind profiles from the Doppler Sodar starting at the beginning of each day. The 'mom' file contains data from each beam about radial velocity and backscattter intensity. Each horizontal beam is approximately 7 seconds apart; vertical beams are approximately 21 seconds apart.
CAMEX-4 ANDROS ISLAND RAWINSONDE AND RADIOSONDES V1
공공데이터포털
The CAMEX-4 Andros Lisland Rawinsonde and Radiosondes dataset was collected by using numerous rawinsondes (radiosondes), which were launched from Andros Island in support of CAMEX-4. These sondes provided atmospheric soundings of temperature, pressure, relative humidity, wind, and altitude.
CAMEX-4 MIPS SURFACE STATION 1 V1
공공데이터포털
The University of Alabama in Huntsville (UAH) Mobile Integrated Profiling System (MIPS) is a mobile atmospheric profiling system. It includes a 915 MHz Doppler profiler, lidar ceilometer, 12 channel microwave profiling radiometer, Doppler Sodar, Radio Acoustic Sounding System (RASS), Field Mills, and surface observing station. This dataset consists of data from Surface Station One containing multiple instruments including an anemometer, rain gauge, thermometer, pyranometer and barometer. Information, collected at 1Hz, includes windspeed and direction as well as precipitation, temperature/humidity, solar radiation, and atmospheric pressure.
CAMEX-4 MIPS SURFACE STATION 2 V1
공공데이터포털
The University of Alabama in Huntsville (UAH) Mobile Integrated Profiling System (MIPS) is a mobile atmospheric profiling system. It includes a 915 MHz Doppler profiler, lidar ceilometer, 12 channel microwave profiling radiometer, Doppler Sodar, Radio Acoustic Sounding System (RASS), Field Mills, and surface observing station. This dataset consists of data from Surface Station Two which contained multiple instruments including an anemometer, rain gauge, thermometer, pyranometer and barometer. Information, collected at 0.5 Hz, includes windspeed and direction as well as precipitation, temperature/humidity, solar radiation, and atmospheric pressure.
목록