In support of CAMEX-3, numerous radiosonde and rawinsondes were launched from Andros Island, which consisted of instruments manufactured by VIS and Vaisala. Some sondes were GPS or LORAN located so that winds aloft could be determined without ground based tracking systems. Data from the sondes were used to validate several ground based instruments observing the lower troposphere.

The CAMEX-4 Aerosonde dataset contains temperature, humidity, and atmospheric pressure measurements collected to study the boundary layer below levels where traditional hurricane reconnasissance aircaft fly. The Aerosonde is an unmanned aerial vehicle with a wingspan of 2.9 meters (~9 feet) weighing approximately 14 kg (~31 lbs). Carrying a payload of air pressure, temperature and humidity probes, the aircraft can fly at altitudes from near the surface to 21,000 feet at speeds of 50-95 mph for periods of up to 30 hours. Controlled by dual computers and navigated by GPS, the Aerosonde is designed to economically collect meteorological data over a wide area.

The Atmospheric Emitted Radiance Interferometer (AERI) was used to make atmospheric temperature and moisture retrievals. AERI provides absolutely calibrated radiances which can be used for forward calculation comparisons of radiosonde and LIDAR (for CAMEX-3, the SRL) profiles and provides a reference to the airborne and ground based remote sensing instruments. Additionally, AERI radiances contain valuable temperature and water vapor information which can be used to retrieve planetary boundary layer thermodynamics. The University of Wisconsin-Madison, Space Science and Engineering Center was responsible for the AERI data collection during CAMEX-3 campaign.

The NAMMA Praia Cape Verde Radiosonde data used Sippican MarkIIa DGPS (LOS) radiosondes, which were launched in support of NASA African Monsoon Multidisciplinary Analyses (NAMMA) mission. This mission was based in the Cape Verde Islands, 350 miles off the coast of Senegal in west Africa. Commencing in August 2006, NASA scientists employed surface observation networks and aircraft to characterize the evolution and structure of African Easterly Waves (AEWs) and Mesoscale Convective Systems over continental western Africa, and their associated impacts on regional water and energy budgets. The radiosondes released were Sippican MK-IIa units developed by Lockheed Martin. The atmospheric soundings were used to measure pressure, temperature, humidity, wind direction and speed and spatial coordinates. Data is grouped by ascending and descending flights and includes temperature, Skew-T, trajectory, wind and time series plots.

The GRIP Barbados/Cape Verde radiosonde data set consists of generally two soundings per day (06Z and 12Z) launched from Barbados, and one sounding per day (12Z) launched from Cape Verde during the Genesis and Rapid Intensification Processes (GRIP) field campaign. The major goal was to better understand how tropical storms form and develop into major hurricanes. These radiosondes measure the profile of atmospheric pressure, temperature, humidity, wind speed and direction, from the ground to an altitude of up to 40 km (in general, the sondes reached at least a pressure of 100 milibars). The launch program began on August 14, 2010 and ended September 24, 2010. The sondes used were type DFM-06, built by GRAW Radiosondes, Nuremberg Germany. Most ascents were done with TOTEX 200-g latex balloons using the DMF-06 sondes. A few launches were made using TOTEX 800-g Balloons with the DFM-97 package (connected with ECC ozonesonde). On some days launch times were changed, and multiple launches were made from Barbados on September 9, 10 and 21. The data were retrieved using a GRAWMET GS-E ground station. The sample rate of the data was 4 seconds for the Barbados data and 2 seconds for the Cape Verde data.

The University of Alabama in Huntsville (UAH) Mobile Integrated Profiling System (MIPS) is a mobile atmospheric profiling system. It includes a 915 MHz Doppler profiler, lidar ceilometer, 12 channel microwave profiling radiometer, Doppler Sodar, Radio Acoustic Sounding System (RASS), Field Mills, and surface observing station. This dataset consists of cdf and mom files tarred together for a day. The 'cdf' file collects 15 minute average 3-D wind profiles from the Doppler Sodar starting at the beginning of each day. The 'mom' file contains data from each beam about radial velocity and backscattter intensity. Each horizontal beam is approximately 7 seconds apart; vertical beams are approximately 21 seconds apart.

The St. Croix Radiosondes CPEX-AW dataset consists of atmospheric pressure, atmospheric temperature, relative humidity, wind speed, and wind direction measurements. These measurements were taken from the DFM-09 Radiosonde instrument during the Convective Processes Experiment – Aerosols & Winds (CPEX-AW) field campaign. CPEX-AW was a joint effort between the US National Aeronautics and Space Administration (NASA) and the European Space Agency (ESA) with the primary goal of conducting a post-launch calibration and validation activities of the Atmospheric Dynamics Mission-Aeolus (ADM-AEOLUS) Earth observation wind Lidar satellite in St. Croix, U.S. Virgin Islands. Data are available from August 19, 2021 through September 14, 2021 in netCDF and ASCII formats, with associated browse imagery in PNG format.

The High Altitude MMIC Sounding Radiometer (HAMSR) CPEX dataset includes measurements gathered by the HAMSR instrument during the Convective Processes Experiment (CPEX) field campaign. The CPEX field campaign took place in the North Atlantic-Gulf of America-Caribbean Sea region from 25 May-25 June 2017. CPEX conducted a total of sixteen DC-8 missions from 27 May-24 June. The CPEX campaign collected data to help explain convective storm initiation, organization, growth, and dissipation in the North Atlantic-Gulf of America-Caribbean Oceanic region during the early summer of 2017. HAMSR has 25 spectral channels which are split into 3 bands to provide measurements that can be used to infer the 3-dimensional distribution of temperature, water vapor, and cloud liquid water profiles in the atmosphere, even in the presence of clouds. Data are available from May 24, 2017 through July 16, 2017 in netCDF-3 format.